That's good feedback Andy, so effectively, no sanding the Timbermate, then VERY careful sanding?
That's good feedback Andy, so effectively, no sanding the Timbermate, then VERY careful sanding?
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Yup, and I started sanding with 240 grit (lightly) which takes off a lot of the excess timbermate, then when i hit the cap, I only sanded it with 320 and 400 grits so it doesn't take a lot off and you can "control" the sanding a bit more.Originally Posted by FrankenWashie
The corollary is the cap wont be as smooth as you would like it and the spalted caps are a bit ripply anyway. I just had to build up heaps of coast of Tru oil to get the cap flat...
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Posting Permissions
Reply With Quote