looking unreal Zandit. So you're using DT clear coats ? sure go for the intensifier. Get a few coats on will look sweet. Give it minimum 3 days curing between coats. It will go a little darker but not much.
looking unreal Zandit. So you're using DT clear coats ? sure go for the intensifier. Get a few coats on will look sweet. Give it minimum 3 days curing between coats. It will go a little darker but not much.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Thanks Wokka, most appreciated.
Yes, I am using DT, and that is only a single coat of the Clear DT Base Stain. I'm going to give it longer since we are experiencing a severe cold snap at the moment, we have received some snow here on the coast!
Tonight I've been playing around with some logo designs. My brand name(even though I'm not selling anything!) is CQC, which stands for Custom Quaile Creations, Quaile obviously being my surname.
Here are a couple of attempts in Paint. Which one stands out for you guys?
#1
Or #2
None of these are set in stone, and I may come up with something else. I'm also not ruling out someone else's option either, so if we have a logo guru around, please feel free to chip in!
Last edited by Zandit75; 24-07-2016 at 09:45 AM.
Acoustics:
1995 Maton EM725C - Solid 'A' Spruce Top, QLD Walnut B&S, AP5 Pickup
2015 Ibanez AEL108MD-NT - Laminated Spruce top, Laminated Mahogany B&S, Fishman Sonicore Pickup
Electrics:
Pitbull LP-1S - http://www.buildyourownguitar.com.au...ead.php?t=5745
Carsen Superstrat Rebuild - http://www.buildyourownguitar.com.au...ead.php?t=6284
Builds in Progress:
Silent Guitar Semi-Scratch Build - http://www.buildyourownguitar.com.au...ead.php?t=6809
Fender electric Fat Strat mim. (Bought)
Maton Electric Acoustic EM325C
Pitbull Guitars ST-1 ( finished) http://www.buildyourownguitar.com.au...ead.php?t=5970
Pitbull Guitars SG-2 ( Finished) http://www.buildyourownguitar.com.au...ead.php?t=6124
Pitbull Guitars JM-1 (Finished. 2018 June GOTM))http://www.buildyourownguitar.com.au...ead.php?t=7150
Pitbull Guitars TL-1 (In production) [url]https://www.buildyourownguitar.com.au/forum/showthread.php?t=8676
[QUOTE=nitroburner1000;112893]Im not a guru but these might help...
Thanks Nitro, I don't mind this one, but for this build, I'm thinking just monochrome at this point.
Thanks for the input though, most appreciated!
Acoustics:
1995 Maton EM725C - Solid 'A' Spruce Top, QLD Walnut B&S, AP5 Pickup
2015 Ibanez AEL108MD-NT - Laminated Spruce top, Laminated Mahogany B&S, Fishman Sonicore Pickup
Electrics:
Pitbull LP-1S - http://www.buildyourownguitar.com.au...ead.php?t=5745
Carsen Superstrat Rebuild - http://www.buildyourownguitar.com.au...ead.php?t=6284
Builds in Progress:
Silent Guitar Semi-Scratch Build - http://www.buildyourownguitar.com.au...ead.php?t=6809