NON-PBG - LP Build Diary for DIY Guitars GLP-40BBK

[Alkay]

Alkay, you can solder the 4 wires to the switch, remember to run the switch wires to the control cavity BEFORE you mount the pickups, I forget to do this and have to remove the pups to feed the switch wires.
You can solder some of the pots and get the hot and earth wires soldered to the jack.
Will have a look at the neck issues when you post it.

Thanks wokkaboy,
I made this mistake too on my last build.

Here's some images of the neck with similar issues. You can notice on the corners I have over sanded. I was thinking of sanding back to the wood and staining again to cover up those lighter parts:




Over sanded on the corners here and lost the cedar stain.





Cheers,

Alkay.