Hey Farnzie, usually minimum 320 grit before staining. Don't go higher than 400 grit as it polishes the surface and the stain doesn't have much tooth to soak into
Hey Farnzie, usually minimum 320 grit before staining. Don't go higher than 400 grit as it polishes the surface and the stain doesn't have much tooth to soak into
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote