Removing Bushings
If you don't like the idea hammering or clamping and pulling out the bushings and maybe damaging your finish then
you can try this method.
Everyone probably already knows this but found this awesome way to remove bushings so just had to share.
You'll need
A small bolt or screw that will fit upside down into the bushing
The bolts for the bushing. Or optionally if you don't want to ruin the look of your bridge's bolt you can get an
M8 threaded bolt (Check the threading for your one, might not be the same)
Drop the screw or small bolt in upside down
Attach your bolt
And screw in the bolt, which will push against your upside down screw and lift out the bushing
Abbra ca da bra!
Reply With Quote