Quote Originally Posted by Simon Barden View Post
You'll find the new saddle tips forwards on the posts. I used some locking post studs on mine to keep it as flat as possible, but it will still tilt slightly. Which then means that the strings have no break angle on the low saddles and is why I swapped the saddles over from the kit ridge top the new one. It's not a 100% perfect fit, but with strings on they felt solid enough.

And try not to have the two bridge positioning screws that stick out the rear screwed in at all if you can help it. There should be more than enough adjustment in the saddles so you won't need the bridge pulled back further at all. They make the bridge even more wobbly and less connected to the posts when used. I think I removed the screws completely. They seem to be a hangover kept from early days with just the stop bar or fixed intonation bridges.
Thanks for the advice Simon, will definitely factor them in when I reach those stages. I do see those bridge positioning screws cause the tilting in the bridge.