RCA4 Bass
I will throw my RCA-4 bass into the mix.
Finish - Sanded down to 240grit and stained using Wudtone Burning Sky and Hot Auburn
Neck - Frets levelled and dressed using similar methods to those mentioned by Ahabs_beard
Hardware - Tuners as supplied with the kit. Bridge a 'no-name' item from ebay that I liked the look of. Control cavity cover, neck pup surround and truss rod cover I made myself.
Electronics - Pickups as supplied with the kit. Wired for stereo with new pots, caps, switch and jack sockets.
For those who don't know (and I didn't properly understand when I set out on the build) the bass has two jack sockets. One mono which works as normal and one stereo which separates the outputs from the two pickups then using a splitter cable each pickup can be run to separate inputs (eg two different amps).
Build diary is here http://www.buildyourownguitar.com.au...ead.php?t=8183
Reply With Quote