Hi Guys here is some photos of my first build. EX-1 kit Bass wood. Antique white Nitrocellulose finish.
I started with the frets levelled crowned and polished.
Then sanded and shaped body neck and headstock with 320.
Set the neck in place.
Applied 5 coats of Sealer primer with a light sand with 600 between coats.
Applied 5 coats of top coat and left for two weeks to cure.
Flat sanded the finish with 1200 then sanded with 1500 then 2000.
Polished finish with Meguiars ultimate compound.
Fitted a set of EMG active pickups HET SET,Gotoh tuners(cosmo Black) Tusq nut.
Reply With Quote