Cheers Guys. Decal now on, I'll leave 24hrs to dry before top coating it (with spray on poly)

The kit supplied P90 literally fell apart and is unusable. Luckily I found a GFS P90 in my stash. I had to enlarge the pup hole slightly to accommodate it. There is a slight gap between the body and pup due to arch on top. I'll fashion up a spacer ring to help with this. The pup needs to be raised a bit towards the strings anyhow

And last job all holes enlarged for new pots and hole for earth drilled behind the tailpiece hinge








Sent from my iPhone using Tapatalk