Ponch's ES5-V

[andrewdosborne]

Cheers Oli. I would think it's possible to sand the bridge base to fit the body contours. See this Stewmac tutorial. They use a jig but don't see why you cannot apply same technique without it

http://www.stewmac.com/How-To/Online..._archtops.html

You'd have to be careful not to take too much of the base of bridge away if string clearance is an issue


Sent from my iPhone using Tapatalk

[OliSam]

Cheers Oli. I would think it's possible to sand the bridge base to fit the body contours. See this Stewmac tutorial. They use a jig but don't see why you cannot apply same technique without it

http://www.stewmac.com/How-To/Online..._archtops.html

You'd have to be careful not to take too much of the base of bridge away if string clearance is an issue


Sent from my iPhone using Tapatalk

You Legend.


Sent from outta space using MartianTalk