sounds good Ponch. Look forward to seeing paint on your jazz bass build ! Loving my JBA-4 with active preamp !
What is the headstock veneer again and is that a waterslide logo ? Logo looks great, would even be better with a Ponch logo on it !
sounds good Ponch. Look forward to seeing paint on your jazz bass build ! Loving my JBA-4 with active preamp !
What is the headstock veneer again and is that a waterslide logo ? Logo looks great, would even be better with a Ponch logo on it !
Last edited by wokkaboy; 08-08-2017 at 08:56 AM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Hey Woks yes a 'Chips' logo would be classic! This axes logo was sourced from here:
http://www.rothkoandfrost.com/custom...-a-side-style/
I cut off the 'Custom' part. The decals are very thin and easy to cover over with finish (but not Tru Oil - I think it reacts with the transfer). The veneer is rosewood - it needed quite a bit of sanding to reduce the thickness of it. But, it covers all the botched work lol.
Last edited by andrewdosborne; 08-08-2017 at 09:17 AM.
Current Projects
#Planning 5 String Bass