Results 1 to 10 of 272

Thread: The D.I.Y. FX Pedal Building Thread

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    Quote Originally Posted by wokkaboy View Post
    sounds good Doc, can't wait to hear it in action

    Just finished recording a rough demo, I'm going to edit it and then I'll post a dropbox link to it once it's all ready, shouldn't take very long so stay tuned.


    Okay as promised, here's a link to the demo of my EH Big Muff build, at the start of it, I've recorded it straight with no amp simulator plugins, just so you can hear what the pedal sounds like on it's own, I start off with the Sustain control at minimum and sweep the tone control from low to high so you can get an idea of the range of tone the pedal is capable of, next I set the tone to about the 12:00 position and then slowly crank up the gain so you can hear the amount of gain it's capable of, the second half of the demo is me playing the pedal through BIAS, an amp simulator plugin, I'm using the JCM900 Clean preset so you can hear what it sounds like through an amp, I used my LP Studio to record the demo, the first half was recorded with the bridge pickup, and the second half was also recorded with the bridge pickup, but I switched to the neck pickup towards the end for a bit of soloing so you can get an idea of what kind of lead tone you can get from an EH Big Muff:


    https://dl.dropboxusercontent.com/u/...uff%20Demo.mp3
    Last edited by DrNomis_44; 31-05-2016 at 01:50 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •