nah Doc with your electronics background I have total faith in your work. Plus can the circuit board be pre-tested did you do that before you posted it ?
nah Doc with your electronics background I have total faith in your work. Plus can the circuit board be pre-tested did you do that before you posted it ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Originally Posted by wokkaboy
To be honest, I didn't get a chance to pre-test the circuit before posting it but I am confident that it should work fine because I used the exact same layout as the board that's in my Big Muff when I made the second board, I made sure that I did a thorough check of all the track breaks on the back of the board, so, if it is wired up as per the diagram I sent with it, it should work first time.
If for some reason it doesn't work first time I'll be happy to do whatever it takes to get it working.
Last edited by DrNomis_44; 29-06-2016 at 03:15 PM.
Posting Permissions
Reply With Quote