Hi Alkay, worth a try using the steel wool. I'd say the ink has soaked in through the whole veneer so I'd say you may not be able to remove it other than sanding through the veneer
Hi Alkay, worth a try using the steel wool. I'd say the ink has soaked in through the whole veneer so I'd say you may not be able to remove it other than sanding through the veneer
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Reply With Quote
