Jba-4

[quiet1_au]

"Jenny" my JBA-4 (ash-bodied) is finally done. Orange Shellac and Tru-Oil finish, everything stock (for the moment) with added copper-foil shielding (to excess... :P )

[Fretworn]

JBA-4 (Ash body) finished in Dingotone Nullabor Ochre (One Base Coat, one Intensifying Coat, 4 top coats). The neck is Dingotone neck clear. All stock except for new "mushroom" strap buttons.

[dozymuppet]

- JBA-4M kit, with black hardware upgrade
- Timbermate ebony wood filler
- Birchwood Casey Walnut Stain
- Birchwood Casey Sealer & Filler
- Birchwood Casey Tru-oil
- Creative-Cuts black block fret marker decals
- Customer headstock decal from fret marker offcuts
- Ernie Ball flatwound strings

[McCreed]

Looks good dozy!

I like the effect the "sharks teeth" give on the headstock. (maybe they're not sharks teeth, but that's the first thing I thought of when I saw it)

[dozymuppet]

Thanks McCreed. True story: When I drew up the idea a while back, I looked at it from a certain angle and thought I might actually cut the shapes out of the headstock. There's a good chance I'll do that for a future build.