Squier Jazz Bass Upgrade

Quote:

---

Originally Posted by andrewdosborne

Time to get the dots in

BTW these are 6mm dots, measure existing dots carefully before ordering them and get a few extras incase you drop one.....

Dots lined up and ready to go

https://uploads.tapatalk-cdn.com/201...e4fe719276.jpg

Take a small file and round the back edges off a bit

https://uploads.tapatalk-cdn.com/201...56fec244a2.jpg

Then a drop of CA glue into the dot hole. Push the dot in using the back of a centre punch. Dot should sit slightly proud of the fretboard and level as possible. You can see the difference in colour with MOP vs plastic dot here

https://uploads.tapatalk-cdn.com/201...cf7f98770a.jpg

Wipe any excess CA glue away quickly with a cloth

Repeat above. All in place! I’ll wait for the glue to cure before starting on the process of shaving the dots flush with fretboard using a blade

https://uploads.tapatalk-cdn.com/201...3f07f84d23.jpg




Sent from my iPhone using Tapatalk Pro

---

Lovely oainstaking word ponch!

Cheers guys, and for the next part..


https://uploads.tapatalk-cdn.com/201...64dd08599e.jpg

To be continued later this evening..




Sent from my iPhone using Tapatalk Pro

Deleted post

And time for dot levelling. I ended up using a combination of small and large craft knife blades and some tape to limit the scraping area. A small file came in handy for cutting back the higher dots. The razor blades worked well for scraping the fretboard afterwards.

Takes a bit of careful work, but comes up alright in the end. Finished off with lemon oil.

All in all it came out ok. I was very apprehensive about performing this task but happy with the results

https://uploads.tapatalk-cdn.com/201...3f04bfb502.jpg

https://uploads.tapatalk-cdn.com/201...c10f0322e2.jpg

https://uploads.tapatalk-cdn.com/201...b338fe362c.jpg

https://uploads.tapatalk-cdn.com/201...6a506eb292.jpg


Sent from my iPad using Tapatalk Pro

Bridge on and a set up required. The Allparts Bad Ass style bridge allows me to align the strings nicely and allows a nice low action.

I think that’s it for this Squire Affinity bass. Every thing that can be upgraded has been. The only surviving original parts are the body, neck plate and neck (although it was stripped back and oiled).

Does it compare to my US and Japanese Fender basses- not quite but it has a ton of character, plays and sounds great and perfect for a knock around/gig instrument. Onto next guitar job, my long forgotten Telecaster with Nashville style pickup setup...

https://uploads.tapatalk-cdn.com/201...8a5a087f9f.jpg

https://uploads.tapatalk-cdn.com/201...61d763af3e.jpg


Sent from my iPad using Tapatalk Pro


Sent from my iPad using Tapatalk Pro

How did the razor blade treatment go? I usually sand the dots but it takes f o r e v e r!

Quote:

---

Originally Posted by Andy40

How did the razor blade treatment go? I usually sand the dots but it takes f o r e v e r!

---

Well... the shaving razor blades were too lightweight to shave back the dots but worked ok for burnishing the fretboard. Stanley knife blade was too harsh, what worked best was a blade from a smaller craft knife this kind of style

https://uploads.tapatalk-cdn.com/201...a2a1109017.jpg

Some very careful filing also helped with the higher dots...


Sent from my iPad using Tapatalk Pro

I use the Stanley replacement blades:Attachment 29244

i find them convenient and easy to get into slightly tighter spots.