Yet another Sale item is coming my way.

ozzbike

Well-known member
I could not help myself and I bought yet another clearance item.

It is an Iceman guitar with a few mixed issues.....mainly a bigsby and a locking nut.

I am thinking a sealed and clear finish....maybe some tinted polyurethane.

I have also ordered some ToneRider Gold humbuckers, some gold locking tuners.
 

Attachments

  • 1.jpg
    1.jpg
    110 KB · Views: 233
  • 2.jpg
    2.jpg
    56.9 KB · Views: 237
  • 3.jpg
    3.jpg
    113.5 KB · Views: 225
  • 4.jpg
    4.jpg
    116.8 KB · Views: 232
The rest of the listing piccies before they disappear......
 

Attachments

  • 5.jpg
    5.jpg
    100.4 KB · Views: 233
  • 6.jpg
    6.jpg
    100.5 KB · Views: 219
  • 8.jpg
    8.jpg
    41.8 KB · Views: 231
  • 9.jpg
    9.jpg
    71.7 KB · Views: 229
The basic bits of the kit are in the order. Plus these extras from PBG:-

2 x treble bleeds
Tonerider AC4 neck and bridge pickups in gold.
2 x sprague orange drop caps 0.02mf.
4 x CTS 500K full size pots
Grover inline 6 locking tuners...gold colour.

From Real Parts:-

25 feet white push back wire (Needed some more...cheapest way to buy it.)
25 feet black push back wire
Graphtech 1/4 inch black TUSQ nut blank.
Modern Style Recessed Cup Jack - Metric Thread - Gold
Schaller Style Strap Lock Set - Gold

What to do with the nut is interesting me. I am thinking that the edge closest the first fret will need to be the front square edge of the new nut....and I will have a 10 to 15 mm Rosewood fretboard bank area behind the nut before the truss rod hole.

I am thinking of trying to find some specs of the Truss rod cover used by "I" and if I can buy one that will cover this exposed fretboard section.

I don't know whether to cut a "G" style end of the fetboard nut or just trim the slab and stand it up hard against the end of the fretboard in an "F" style.

Frankie suggested, in another thread....

https://www.buildyourownguitar.com.au/forum/showthread.php?t=11339

That after doing an "F"Style nut that I make a style piece for behind. The fretboard has Mother of Pearl inlays and tortoiseshell binding....maybe a section of material like that across the gap.

The listing:-

"Includes:

Mahogany body with spalted maple veneer top and tortoiseshell binding
Mahogany neck with rosewood fretboard (628mm scale, 22 medium jumbo frets)
Mother of pearl inlays and tortoiseshell binding
Spalted maple veneer headstock
Locking nut (this would probably have to be replaced with regular nut)
2 x Humbucker pick ups
2 Volume and 2 tone knobs and 3 way switch
Gold hardware and machine heads
Bigsby style tremolo
Guitar lead
Strap buttons
All electronics (pots, caps, wires and solder)
FREE Shipping – Anywhere in Australia
Level of Soldering Difficulty: Advanced – there are a number of solders that can be challenging for new builders."
 
Oh yeah! A tortoiseshell accent piece and maybe the same in the TRC?

Now this a man of my own thoughts....

Can get pearl to match the fingerboard inlays...

https://luthiersupplies.com.au/luthier-materials/pearl-inlay?product_list_limit=36

Or some tortoiseshell binding in a shape of some description....

https://luthiersupplies.com.au/tortoise-plastic-guitar-bindings

Or some plastic acoustic tortoiseshell sheet to cut up...

https://luthiersupplies.com.au/acoustic-guitar-pickguard-blank-self-adhesive-tortoise

The existing binding is single ply....this is three ply stuff...

https://luthiersupplies.com.au/acoustic-guitar-pickguard-blank-self-adhesive-tortoise

I think I will wait until she arrives before I make a choice.

Nice looking kit Ozz. Whatever you choose I'm sure its going to look smashing.

rob

Thank you for the confidence Rob.....I am thinking like the headless bass I did....seal it up with CA Glue and perhaps some of that tinted Poly I have stashed as a top coat or two. Gloss body finish...gloss headstock finish...satin back of the headstock and neck for smooth play.

Perhaps the back of the neck and the headstock in satin polyurethane over a sealed and levelled neck......mahogany timbermate and some topcoat.

I have found a headstock template that matches the normal headstock. Most of them are 3 a side tuners or reverse with six on the High E side. But I think the factory shape will cut nicely into the headstock on this one.

This one is for sale upon completion....need to save some money for the next one and some bills.
 
OO OO OOO TORTOISE SHELL ACCENT INLAID WITH PEARL DETAIL! Why am I yelling?

OOH you are a task master are you not. I do have a Dremel with heaps of attachments.....so gouging out a recess in a piece of binding to drop a single mother of pearl dot in there is not beyond me.

I even think that just a straight piece of binding across behind the Nut between the nut and the TRC with a dot in in the middle.

I have some pieces of wood veneer here....and a section of white binding....that I could mount a couple of pieces of the tortoiseshell binding to. Then perhaps cut a TRC from that item into this shape.....
 

Attachments

  • s-l400.jpg
    s-l400.jpg
    26.9 KB · Views: 163
That is going to be a truly awesome, unique axe! Nice get! The one thing I'd suggest is putting the controls a little closer to the guitar...

Now that is funny...actually had a big smile and laughed out loud.

I will try to shorten the length of the control wires....just for you....so I can step a little closer. :)
 
I'm following this one with interest. Currently working on my own Iceman and hoping to be finished in the next few weeks.

Enjoy the build!!

Graham

Good on you Graham. I find the hardest part for me is choosing what colours, stains, finish to use. The actual doing of the build is quite relaxing and if you take your time it is relaxing.

I want to do something with that amazing top....but not over the top...but maybe a stain colour under nice gloss clear finish....perhaps a tinted poly finish.....a similar finish on the headstock.

I think I will pore fill, spray poly the body in gloss on the back....satin on the neck....maybe some CA glue after a couple of poly coats to make a completely flat surface.

But the top is taxing me.....is it screaming light colour in the middle and darker edges to anybody else? Maybe just an all over soft colour with the natural body colour differences filling the shading in? Perhaps even a differing edge colour....maybe a rubbed oil and wax sides...with gloss top and back....something different.

See graham it is a nightmare for me....aaaaaahhhhhh. :)
 
The purfling is what had be confused as to how to finish this one.
I was thinking leaving the front alone and matching up one of the brown shades from the purfling for the sides and back, keep it looking natural and organic. Probably the first and last time I would want to use brown.
Looking forward to see what you do.
I think this is the problem I faced when I made a purchase out of the specials bin. It’s not as if I had an idea in mind and brought the kit to match. I brought the kit and had to come up with the idea of how it was going to turn out.
 
But the top is taxing me.....is it screaming light colour in the middle and darker edges to anybody else? Maybe just an all over soft colour with the natural body colour differences filling the shading in? Perhaps even a differing edge colour....maybe a rubbed oil and wax sides...with gloss top and back....something different.

Bury it! bury it in the deepest, darkest, triple pigment black you can find so that no one will know what grainy secrets lay hidden beneath!
 
Back
Top