Strat au naturale (ST-1L) - First build, WIP

ozbird

Member
I've just started my first kit - an ST-1L (thanks PitBull for the lefty special!)

The neck was pretty good out of the box. The maple just needed some 1200 grit wet/dry sandpaper to come up nice and smooth. I'll probably finish it with a light coat of Tru-Oil to bring out the grain and mild flame figure.

The rosewood fretboard appears to have been filled and sanded where there is the side of a knot on the underside. Unfortunately, this was done after the frets were fitted - two scuffed frets. :-/ Some 000 and 0000 grade steel wool polished out most of the scratches. The rest was okay, but felt a bit rough; I lightly rubbed the rosewood with steel wool for a smoother finish.

I'd previously bought some Fret Doctor oil (http://beafifer.com/boredoctor.htm) - it's awesome stuff. A little goes a long way. (Postage is a killer; buy a "big" 60ml bottle, and share it with your mates.)

Aa with other oils, apply with a small piece of cotton cloth and reapply where the wood is "thirsty". Working up and down the fretboard several times is probably enough. Buff off with a clean cloth after 15 minutes or so, and again 15 minutes later (until "dry".) A tea towel or similar is better than a soft t-shirt; it helps to polish the wood.
 
Before pictures:
x920h-before.jpg

252gu-before_closeup.jpg
 
After pictures:
31963-after.jpg

6te36-after_closeup.jpg


Much nicer! From the Fret Doctor FAQ:
A very frequent comment I hear is that "Fret Doctor darkens my board nicely!" Over time, with exposure to air, light, humidity, and wear and tear, the board faded. The Fret Doctor simply restored it to the original color. (snip) Fret Doctor will bring up the natural color, grain, and patina of a tropical hardwood, making it darker in appearance but not making it black. Ebony will appear blacker because black is the normal color of the wood. Your Rosewood will be far prettier.
 
Hi Paul,
Great work on the fretboard. She looks a million bucks now. Looking forward to the rest of your build!

Cheers,
Gav
 
great to see another lefty!, nice work on the neck, looking forward to seeing the build progress
 
Thanks guys!

Sanding the basswood body is going okay so far; I'm not a diarist - so expect a post on "here's one I prepared earlier." ;-)

(I started with 400 grit, but need something heavier to get rid of the glue marks and sanding marks.)
 
Wow, that made a huge difference. Looking forward to how you do the rest of it.
Love the name too. Cool!
 
Thanks, Gavin; I've got some of those brushes here somewhere.

Thanks for the feedback on the name, lawry; I'm still not sure about it, but I've corrected the spelling so it doesn't sound like a Partscaster. ;-)
 
A couple of "before" body shots.

Four random pieces - but a darker, harder piece in the critical centre section.

Basswood is considered a "boring, bland" timber, but the grain and (mild) figure looks pretty good!
Enough to justify a simple, clear finish e.g. Tru-Oil (maybe with a splash of coloured dye underneath.)
The holes for the earth wires and output jack are oversized and rough, but meh.

qn7sj-20140604_190531.jpg

p7ray-20140604_190554.jpg
 
Quote from ihasmario on June 9, 2014, 20:33[/b]
Pretty nice looking body. Love the thread name lol

:)

The more I look at it, the less convinced I am about colouring the body.

It natural basswood colour isn't far off "Vintage Blonde", and Phil's wax finish looks great too!
ST1-Gallery-05-600x600.jpg


The two "natural finish" options I'm considering are either white shellac, or Tru-Oil (which I'll use on the maple neck anyway.)

My brother used shellac on his JBA-4 "Jenny" bass; it looks great, but I don't like the colour (orange.)
U-Beaut's white shellac sounds ideal: "a bit harder [than other shellacs], shines a bit brighter, is completely free from wax and will not change the natural, wet colour of wood."

Tru-Oil looks good too - but it might darken the colour too much?
 
I haven't had much time to work on sanding, but going back to coarse grits and sanding gently by hand seems to be working. Sand smarter, not harder... That said, there are some annoying tool marks that haven't shifted yet.

It turns out that the "glue marks" on the back are actually filler. Annoying, but no biggy.
 
A quick update.

I've decided to go with a Tru-Oil finish for the body and neck ("Tru-Dat"?); I'm very happy with the results so far. (Who says basswood is "bland"?)


8ebja-figure.jpg
 
Looking really good, mate.

That figure in the basswood is surprisingly really, really nice. But the clincher is definitely that maple neck. Glorious figuring there.

Quick question though, but are you planning to shape your headstock? I think it would really make the guitar look all class with a sweet shape up there.

But, I digress. Looking good man. :)
 
That figure in the basswood is surprisingly really, really nice. But the clincher is definitely that maple neck. Glorious figuring there.

Thanks! The photos don't do it justice. I knew it had potential after wiping it down with methylated spirits (tip!), but was still pleasantly surprised. The body is a bit of a mixed bag with the four random(?) pieces of wood, but even the "boring" bits have some interesting patterns and textures.

N.B. The body isn't finished, yet. It's had about four coats of Tru-Oil so far, rubbed back a couple of times with steel wool. It needs a few more coats for a smooth finish.


The maple neck is nice, too. It has a broad tiger stripe effect across the grain all the way down to the base, and interesting topographic map grain patterns underneath.

Word of the day, Chatoyancy:
https://en.wikipedia.org/wiki/Chatoyancy

Quick question though, but are you planning to shape your headstock? I think it would really make the guitar look all class with a sweet shape up there.

To be honest Brodie, I'm a bit terrified of messing it up - so have put it off as long as possible...
Have coping saw, will cope - right? :?

I've pencilled in a basic shape, with several millimetres of margin. Cut, file, sand etc.

iox6y-headstock.jpg
 
Looking great Ozbird. Who would have thought Tru-oil on natural basswood would look so great? Fantastic job.

cheers,
Gav.
 
Back
Top