September 2015 Guitar of the Month

adam

Well-known member
Enter your finished guitar here to be judged for Pit Bull Guitars September 2015 Guitar of the Month.

Please remember:


  • One guitar per member per month
  • It must be a Pit Bull Guitars kit (mods and upgrades acceptable)


We need 4 photos:


  1. full guitar shot from the front;
  2. close up of the body finish;
  3. shot of the back of the guitar; and
  4. close up of the headstock (please, no brand name logos)

Please post your photos in this thread. If you are having issues posting photos on the forum, please email them to adam (at) pitbullguitars (dot) com

Please note: This competition is open to amateur guitar builders only. If you are making and selling guitars for profit, you are ineligible.

Competition for September closes 31 August 2015.

Winner will be judged by the Pit Bull Guitars Judging Panel, including the winner of the August GOTM.
 
RC-4 "The Cole" by Arzi

Hi

This is my entry for september GOTM. RC-4 with following mods and specs:

Coloring with water based stains "cole black" and "fire engine red"

Finish with TO

Individual black string bridges

customized black pearl scratch plates and truss rod cover

black tuning pegs with stock chrome ferrules

black strap locks

electronics shielded with aluminum tape


This is my second build so far. Can´t wait for the next one. Huge thanks PBG and to all of you builders that have educated me through your wisdom and diaries during this process. I was gonna keep this close to stock at first but when I saw the flaming on the body - everything changed and this is what happened. :)

Arzi
 

Attachments

  • 1.JPG
    1.JPG
    251.7 KB · Views: 472
  • 2.JPG
    2.JPG
    234.6 KB · Views: 308
  • 3.JPG
    3.JPG
    339.5 KB · Views: 327
  • 4.JPG
    4.JPG
    308.1 KB · Views: 334
  • 5.JPG
    5.JPG
    332.9 KB · Views: 319
awesome build Arzi,knew this would be the first September entry !
This will be very hard to beat.
 
Last edited:
RC-4 "The Cole" by Arzi

And some more...

Had to change the headstock photo for another after stringing again....
 

Attachments

  • 6.JPG
    6.JPG
    287.3 KB · Views: 321
  • 7.JPG
    7.JPG
    295.2 KB · Views: 306
  • 9.JPG
    9.JPG
    315.3 KB · Views: 315
  • DSC_0446.JPG
    DSC_0446.JPG
    221.5 KB · Views: 340
Last edited:
Here is my offering for GOTM. My first attempt.

I am happy enough, but I don't think it can compete with the masterpieces I've seen around her!

So here is the LP-1M.

Stock, out of the box.

Top:
1 Coat of DT Coolangatta Gold
1 Coat of DT Intensifier
3 Coats of DT Finish
10 Coats of Hand Rubbed Tru-Oil

Body:
15+ Coats of Hand Rubbed Tru-Oil

Neck and Headstock:
20+ Coats of Hand Rubbed Tru-Oil

All of the Tru-oil had 0000 Steel Wool or 1200 Wet & Dry rub back after every second coat.

Full Length
Full Length 01.jpg

Headstock
HS01.jpg
HS02.jpg

Body Rear
Body Rear 01.jpg

To Be Continued...
 
well done Rabbitz I love the colour of the top and I didn't realise the back/sides/neck were just tru oil. Shows how nice mahogany looks with just clear coats. I could definitely picture Slash playing this beast. You got to be really happy with this for a first build. How does it sound ? I've found these LP kits sound pretty good stock. The pups have a nice growl
 
Last edited:
Hey Woks,

Thanks.

It sounds better than I can play, that's for sure. Still toying around with the set up - it wont stay in tune yet. It's only had tension on it for less than 24hrs so the timber is still moulding itself.

Plus, as I usually play an acoustic, and use a clip on tuner, do you reckon I can find one of my (several) plug in tuners? Clip ons aren't accurate or stable enough on this one!!
 
nice job Rabbitz, simple , classic and classy (the judges do like headstock logos, just saying...)
 
Hi all,

Here's my first entry for Guitar of the Month, its my second build, but I'm still tinkering on the first...

It's a standard TL-1A kit, with a bone nut and the added Bigsby B5. First time trying a sunburst, which was a combination of the Dingotone Outback Sunset and Blackstump finishes. Went with a matte finish, which I'm super pleased with.

Very happy with how it's turned out, and sounds great. Will eventually upgrade the pickups, but need to do a bit of saving first...


DSC_0157.JPGDSC_0154 copy.jpgDSC_0152.JPGDSC_0155.JPG
 
@Arzi, spectacular build, some really nice personalized touches that make it stand out, awesome stuff.
@Rabbitz, I'd be well happy with these results, I especially love the vibrancy of the top and the shimmer you achieved on the headstock, quality work man!
@Tom, I love everything about this, I think you should probably give it to me;-)
 
Thanks guys,

yep, Wokka, Alder body. I think you did one similar a while ago? You inspired me...
 
Back
Top