This is how I put the logo design on my headstock. I did some poking around, and one site had a great suggestion about taking label paper and taking all the labels off, and printing on the non-stick side of the paper. The label backing is nice and thick and runs through the printer really well. Got to work fast because it only transfers wet ink. Practice on some scrap wood first. Easy to smudge. I put mine on top of the chemical wash, and it came through fine. It is kind of light. I just used it as a guide for painting over it. I set my print settings for draft so it would be really light but you might want to set it for high-quality if you are doing a complete transfer, so you get more ink.