PK's Acoustic Epi brace repair

kells80aus

Active member
I'll start this by expressing my extreme disatisfaction with the guy I bought this Epi off.
I paid $148 on ebay for a very nice acoustic Epi.
The guy that sold it to me should never ever go anywhere near a guitar EVER.
This guy refused to let me come pick it up. He Posted it to me. He wrapped it in a Black plastic bag and then wrapped it in corflute cardboard.
The end result is some internal damage to the braces that meet in the middle under the bridge.
At first I thought it was only one brace but on inspection today it was far far worse.
Firstly, the rear upper cross brace was split down the middle. I currenlty have this glued and drying.
Not sure if I got enough glue under it or not.
The second damaged area was the forward brace on the same side(the top edge). this brace had deglued and taken about four square inches of the first two layers of laminate off. I have no idea how I can fix this without spreading glue all over the place.
then I have to glue the brace back down.
I am thinking that little repair has to go to some one who actually knows what they are doing.

To give you an idea of how hard this is the following YouTube is of a regluing upper braces.
The guy prattles on about crap, but you get the idea

https://www.youtube.com/watch?v=wn216Lqjs8U
https://www.youtube.com/watch?v=z1_5m7UuqC0

I'll try get a couple of pics if I can find a camera to fit.

PK
 
wow thats bad news PK, bummer. Well its a lesson not to buy acoustics that are badly packaged for posting. They are delicate and really need to be in a case.
Stick at it, you never know you may be able to repair it, main thing is it plays ok, how it looks isn't as important
 
Epi Repairs

Not happy Jan.....

If you zoom into the edge of the guitar you will see some cracking around the edge.
the second shot is the deck internal damage, the third is the brace I glued... just hope it sticks.

PK
 

Attachments

  • 2015-02-27 15.17.43.jpg
    2015-02-27 15.17.43.jpg
    44.2 KB · Views: 278
  • 2015-02-27 15.19.09.jpg
    2015-02-27 15.19.09.jpg
    28.7 KB · Views: 283
  • 2015-02-27 15.19.48.jpg
    2015-02-27 15.19.48.jpg
    24.8 KB · Views: 251
Just realised this delamination is right next to the pre-amp, so may have a second window to get through to repair it.

Like most things, it just takes a careful bit of thought.

PK
 
maybe you should bring it to Stan's House of Epi Repair...

Does the internal damage show through to the top?
 
absolutely Blind Luck.

The pre-amp hole is right over the fracture spot.

I'm seriously thinking this could use a bit of surboard technolgy.
A little piece of four ounce woven glass and little bit of resin.

BUT I'll try normal glueing first.

I'd like to here if DB has any guidance for this as well.

PK
 

Attachments

  • 2015-02-27 15.44.42.jpg
    2015-02-27 15.44.42.jpg
    29.3 KB · Views: 264
Hi Stan,
There is a crack right along the upper edge of the deck, about 100-130mm long. It just shows as a crack in the gloss finish(something else to fix)
I probably could get a clamp in. I was thinking it is going to need a little bit of reinforcment of some kind.

I'm just no quite sure what to use.
While fiberglass would be thin and strong, the resin is likely to seep through the crack.
So it will have to be some form of wood, that is glued in with Tite bond so it can be easily cleaned up.
All I have is some 3 mm sapelle, and some half mm maple.
The maple could be layered a few times to create a patch.

Definitely worth a trip to Stan's Epi repair centre

PK
 
I'll start this by expressing my extreme disatisfaction with the guy I bought this Epi off.
I paid $148 on ebay for a very nice acoustic Epi.
The guy that sold it to me should never ever go anywhere near a guitar EVER.
This guy refused to let me come pick it up. He Posted it to me. He wrapped it in a Black plastic bag and then wrapped it in corflute cardboard.

PK

What a nob!
 
my guess it was posted to cover that fact that it was damaged, way easier to let someone come and get it versus the hassle of posting a guitar
 
my guess it was posted to cover that fact that it was damaged, way easier to let someone come and get it versus the hassle of posting a guitar

Yeah not too hard to go for a drive and query the idiot over it face to face though, that shit makes me wild.
 
Yeah not too hard to go for a drive and query the idiot over it face to face though, that shit makes me wild.

I doubt it would be worth the trouble, he would deny it and what proof have you other than he is a first class douche...
 
I have two thoughts about the sale of this Guitar.
well maybe 3 if you consider he tried to learn guitar and failed.
The two I have in mind is this is a Hot Guitar, hence the lack of care in shipping,
Or he got kicked out of home and wasn't living in Geelong anymore and needed some money fast.
These epis are usually about $400 new so he got a good price for it had he not been a NOB and posted it.

PK
 
i think a thin patch would suffice if you could get enough even pressure on it.

I think if you bulk it up too much, you may create a dead area in the sound board and lose tone...

If the crack goes all the way through then you really need to glue it and clamp across the guitar as well to close it
 
I would have bought it damaged or not. the total cost was $128 for the guitar, and $20 postage.
The damage while it is a pain is fixable. Getting my chubby little hands inside it is a strugle, they don't seem to articulate as well as they did years ago. I couldn't Imagine AJ trying to get his hands inside an acoustic, he's twice my size. :D
I will work through this and it will be a nice guitar to play with.
As it is I have already spent plenty of time over teh last few weeks sitting on the couch picking and strumming away.
It's only been today that I have had enough spare time to take a look inside. I've bought 3 Stewmac brace jacks, made a mirror, bought a light and camera, both of which are almost a fail as they are too small to get setup in the right place, and as soon as you stick you hand inside the guitar everything moves around.
Glueing backwards with a pipette is a bit of fun. hence I still dunno if I got enough glue in the split.
Next time I'll find a wedge to keep it open a bit further(things you find on Stemacs YouTube)

PK
 
Stan, if you look closely at the first pic the crack is just inside the upper edge.
pretty much along the edge of the binding


PK
 
i actually think if you could push the crack inside back together right then you wouldn't have to patch it at all

Dale Erwine from Stewmac has some good vids for sure
 
Back
Top