Pit Bull Guitars EXA-4 Electric Bass Guitar Kit (Custom Special)

ozzbike

Well-known member
I have swooped again on the Specials list.

Ash Body.....binding.....on one edge.....humbucker and p bass pickups.....nice.

The listing......

Pit Bull Guitars EXA-4 Custom Special Electric Bass Guitar Kit Includes:

Ash body with front white binding
Maple Neck (bolt-on)with Ebony Fretboard
MOP Block Inlays
34″ Scale with 22 frets
Black hardware
Humbucker bridge and PB neck pick ups
2 volume and 1 tone knobs
Strap buttons
All electronics (pots, caps, wires and solder)
Set of Bass Strings
FREE Shipping – Anywhere in Australia
Level of Soldering Difficulty: Pro

This kit contains everything you need to build a complete, playable guitar, except your choice of finish.
 

Attachments

  • CS007.jpg
    CS007.jpg
    314.2 KB · Views: 316
Geez Ozzie, interesting score and welcome to the ever growing Explorer Kit owners club!

She will make 25 in my possession. This one shall be a natural front of the body and headstock....and a deep colour on the sides...back...and neck. Blue...red...green...black....who knows.

But Ash body filled with timbermate....maybe a dark colour on the front....sanded off then sealed with Tru Oil.

I could not resist when I saw her on the list......gotta think of a name for her.

Was nearly going to grab a Hoffner style with a spalted top.

This is more my speed. Pretty keen. 😎
 
Last edited:
It is similar to your TBird with that 3 point bridge and vol, vol, tone controls.

Sent from my SM-A520F using Tapatalk
 
Feast Watson golden teak would look pretty good.
Being solid ash with no veneer that leaves you with plenty of options.

Sent from my SM-A520F using Tapatalk
 
This will be fun to follow! I'm lurking for an EX1 myself so I'm curious what you are going to create with this build :)
 
Feast Watson golden teak would look pretty good.
Being solid ash with no veneer that leaves you with plenty of options.

Sent from my SM-A520F using Tapatalk

I happen to have golden teak....and I quite like the colour....but on the front over say....walnut timbermate sanded off and then the Tru Oil dance.

Maybe a deep red on the sides, back, and neck. How did your Red ES go under Tru Oil...did it make it deeper....towards maroon in colour?
 
This will be fun to follow! I'm lurking for an EX1 myself so I'm curious what you are going to create with this build :)

This is a special order that the original customer did not rate....so Ozzie did swoop.

I will warm up to this....but Ash has great grain and you can’t bury that under paint.
 
It is similar to your TBird with that 3 point bridge and vol, vol, tone controls.

Sent from my SM-A520F using Tapatalk

Definitely not a fan of ANY three point bridge. They are really a compromise for string height......no individual string height adjustability.

But this one has a P BASS split pickup in the neck...and one of THOSE quiet humbuckers in the bridge. This one maybe DUNCAN time. Quarter pounders in the neck and a passive blackout in the bridge.

Of course some exploratory electronics...wth guidance from yourself and weirdy....of course.

I am thinking push pull for series/parallel on the neck.....and maybe two push pulls in the bridge for the four split options weirdy gave me today. So V V T all push pull.....nice.

No preamp....just not a fan.
 
Hi Ozzie, understand that you are not a fan of the pre amp. Must say that I am a little underwhelmed by how it sounds and still getting used to it. Worst case scenario would be to leave both Bass & Treble controls at centre detent as that effectively bypasses it.

As for Tru Oil over shades of Red, the darker the better as on my J Bass that was the same ink & stain as used on the ES1 and after 2 or more years it still looks great and not showing any of the TO slight yellowish typical signs of ageing. As layers of TO went on the ES1 I thought it enhanced the stain, a bit like DT intensifier does, but then TO does that with most stains I have used except Blue as that just kept going greener with each additional coat.

Wiring options on this new toy......hmmm.....best to wait for Weirdy's advice.

As for replacing the Bridge Humbucker if it is the same size as what comes in EX5, IB5, and a few others it is has unusual dimensions and just did a quick measurement on EX5 that reveals PUP cavity is about 100 mm x 40 mm. Not sure if Duncans come in that size? I know that there is a passive EMG that does as I nearly bought them before choosing Custom Bensons. Bartolini also make some in that size but they are not cheap and also hard to find.

What do you plan to use for a bridge if not using the stock 3 pointer? Looks like Black hardware which limits your options to possibly something like what I have upgraded to on the EX5 which was bought from Real Parts.

This one has 18 mm string spacing... https://www.realparts.com.au/bridges-tailpieces/bass/adjustable-4-string-bass-bridge-black.html

Or this Gotoh one with 19 mm spacing is a little bit dearer and probably what I would choose as the other one has lots of little grub screws to hold it all in place which has caused me to baulk at final setup and intonating as that may take a lot longer than using a typical F style bridge.... https://www.realparts.com.au/bridges-tailpieces/bass/gotoh-201b-4-string-bass-bridge-black.html
 
Arrival !!!!!

After seven days on deck...I arrive home and the big box has arrived. :)

I love the grain in the body....the fingerboard has such an awesome figure as well.

mmmmmm.......sanding time......
 

Attachments

  • 1.jpg
    1.jpg
    204.4 KB · Views: 165
  • 2.jpg
    2.jpg
    198.1 KB · Views: 186
  • 3.jpg
    3.jpg
    158 KB · Views: 186
  • 5.jpg
    5.jpg
    232.6 KB · Views: 186
  • 4.jpg
    4.jpg
    147 KB · Views: 170
The issues and with timbermate.

Honestly I don't know what I look at when these things arrive?

Found this when I was sanding today.....apparently the factory went a little hard on this side.

mmmmm......never played with binding....maybe a chance here.

Then drowned in Ebony timbermate and hanging to dry. Sand tomorrow....I have some Golden Teak and Mahogany Prooftint stain from Feast Watson. I had an issue when I used alcohol based stain with binding in the past. The stain really found the cracking and stretching marks in the binding and did not come out.

I see here...that some others use a polish with steel wool before the stain as a way to keep the binding unmarked.

It will be interesting.
 

Attachments

  • 1.jpg
    1.jpg
    155.8 KB · Views: 177
  • 2.jpg
    2.jpg
    150.8 KB · Views: 172
  • 3.jpg
    3.jpg
    157.5 KB · Views: 174
  • 4.jpg
    4.jpg
    176.5 KB · Views: 189
Oh bugger about the binding. But then again.. it's fixable and a skill worth having a crack at. I have a bit of a mental idea to try and do aluminium binding at some point.

Looks like you scored a rosewood fretboard rather than the composite stuff?
 
Oh bugger about the binding. But then again.. it's fixable and a skill worth having a crack at. I have a bit of a mental idea to try and do aluminium binding at some point.

Looks like you scored a rosewood fretboard rather than the composite stuff?

Before I started sanding it all looked good.....really hard to tell how deep the binding is......it just disappeared.....they must have been at it hard.

I have a Stewmac binding router guide and binding router bit on the way.

I will have to troll the net for how you get the old binding off.....would you know what glue is used to secure it....and what is a good tape to hold it on whilst it dries....I only use the low tack painters tape for covering things.

The original listing showed EBONY......whatever it is....it is better looking than the engineered stuff.....reckon it will come up great with lemon oil and dr ducks.
 
Oh well it probably is ebony. Very nice!

I'm sure a bit of heat would loosen up the binding glue, that's where I'd start with a hair dryer or something. I think the painters tape would probably work, you just need to use a lot of it from the pics I've seen online. Someone on here (might have been Zandit?) used too much tape and the glue solvents couldn't escape so I guess that's something to be aware of.
 
Binding is over rated and loves to show up all it's flaws if not adequately covered when applying stain.
I'd be tempted to sand the lot off.
Alternatively, if you really want to keep the binding gotta wonder how hard a repair job might be compared to full refit?

Sent from my SM-A520F using Tapatalk
 
Binding is over rated and loves to show up all it's flaws if not adequately covered when applying stain.
I'd be tempted to sand the lot off.
Alternatively, if you really want to keep the binding gotta wonder how hard a repair job might be compared to full refit?

Sent from my SM-A520F using Tapatalk

The repair is interesting. I would have to try and match the binding colour....size...shape.
 
Hi ozzbike.
It’s hard to tell without the guitar in hand, but could a repair be as simple as adhering binding with acetone over the damaged area (and a little past it) and then sanding to a level?
 
Outside the box Ozz, but you could put a forearm chamfer from that point and then blend back into the existing binding back toward the horn. Wouldn't have to be aggressive. Seems to a feature of a lot of high end gear lately with the blended binding.
 
Back
Top