October Guitar of the Month (for Guitars and Basses finished in September 2016)

Brendan

Well-known member
October Guitar of the Month (for Guitars and Basses finished in September 2016)

September 2016 GOTM

Enter your finished guitar or bass here to be judged for the Pit Bull Guitars October 2016 Guitar of the Month.

Please remember:

For Guitars or Basses finished on (or before) 30 September 2016

One guitar/bass per member per month
It must be a Pit Bull Guitars kit (mods and upgrades acceptable)
Guitar or Bass must be finished and playable


We need at least 4 photos:
· full guitar shot from the front;
· close up of the body finish;
· shot of the back of the guitar; and
· close up of the headstock (please, no brand name logos)


Please post your photos in this thread. If you are having issues posting photos on the forum, please email them to adamboyle (at) pitbullguitars (dot) com

Please note: This competition is open to amateur guitar builders only. If you are making and selling guitars for profit, you are ineligible.

Competition for September closes 30 September 2016
 
Hey I'm a noob here, this is the first Pitbull guitar I've made so figured I'd let y'all have a look......as you can see it's a GR-1SF; the whole build went together pretty well & I'm very pleased with the result, especially for the low dollar amount it wound up costing me. Finish is 3 coats of Teak oil (stuff reeks to high heaven but it does give it a nice golden color) followed by three coats of wipe-on poly all sanded down to 1500 grit. (I call her "Blondie.") Neck is just the wipe-on poly. The extra pickup in the middle is from Guitar Fetish (I've just got this thing about 3-pickup guitars, what can I say) and it's wired with that second toggle in an "off-on-only" configuration like a Jay Turser hollowbody I once had. I had some tortoise laying around so made my own pickguard, trussrod cover, & faceplate for the vibrato. The bridge is a Gotoh locking roller type. Put my initial in copper foil on the headstock. Sounds real mean with a set of Ernie Ball 9s on it & definitely gets the looks when I'm on stage.....I don't think the pictures do it justice but anyhow here it is.....So whattya think?
PIT BULL FRONT.jpg PITBULL HEADSTOCK.jpgPITBULL FINISH CUTAWAY.jpg
PITBULL FULL SHOT.jpgPITBULL REAR.jpg
 
Bravo I say, Blondie looks hot, her sonic abilities have cracked your drive way already!
 
really nice build Archie and welcome to the forum, how does it sound and play ? with 3 pickups you must have a great range of sounds !
 
really nice build Archie and welcome to the forum, how does it sound and play ? with 3 pickups you must have a great range of sounds !

Yep, with 3 pickups we've got 7 different combinations; my two favorite are still the top alone and the top & bridge; the bridge alone gives you a mean & aggressive kind of lead tone and the middle alone gives you a strident sound but with some character......Go from setting to setting & there's never a dull moment. It plays real good but definitely different from my other axes; first thing to get used to is that big fat body!
 
Damn, that looks superb.

If I was to build one of these it would either be nude blonde as you have done here or maybe red like my J Bass.
 
Hi Guys, another first timer here with an ES-1G. I used to muck around with making acoustics from scratch in Margaret River about 15 yrs ago, and a few months back a friend of mine got me onto the Pitbull website for a look. What can I say, I was instantly hooked and ordered a kit straight away!!

I actually wanted to go for a lighter Indigo Blue colour but when I put this Angelus leather dye on I decided it looked so good I'd just go with it at full strength. It's had about 10 coats of Dulux Duramax clear gloss (from Bunnings) and was polished by hand with Meguiars Ultimate and then Scratch x 2 (from Auto-One).

The neck stain was a blend of maple with a touch of red and brown in there to make it a bit more vintage (Bunnings).

All electronics are standard issue from Pitbull except I split each of the the pickup wires apart to separate the coils then and wired in two push pulls on the volumes for coil split and series/parallel.

The only thing I stuffed up was that I used a foaming glue for the neck join which just bled and bled forever. It was late on a Sunday and I just couldn't wait to buy some strong PVA the next day so I just thought bugger it, I'll glue the sucker. The neck join was a great fit so no problem there, it's just I had to keep wiping the excess as it foamed to avoid spoiling the finish. Not a disaster though...

The headstock has some purfling inlay that I had lying around in the drawer from making guitars 15 yrs ago. Not my best effort, but it looks OK. The next guitar I do will be better with a decent router base for the dremel I hope (lesson learned!). The name Lansejita is a bit of a pun really, I knew that the kits probably come from China and Lan se ji ta is Chinese for "Blue Guitar". 1080 on the truss rod cover is a nickname that some mates call me.

I have compensated the nut as a bit of an experiment (found googling late one night) and surprisingly it works amazingly well. The intonation is spot on and chords are in tune everywhere on the neck.

Anyway, loved the build process and I'm already lining up #2, probably a Les Paul or maybe a flying V. Cheers and any questions welcome.

Dave

20160922_181831[166388].jpg20160922_181928[166365].jpg20160922_182301[166418].jpg20160922_182345[166417].jpg20160922_182411[166428].jpg
 
Last edited:
ooooooo that BLUE, mmm Vibrant. Great job TenEighty like the headstock detail as well, is that a compensating nut you got on there?
 
Thanks FrankenWashie. Yes mate, my first attempt at comp nut and while the look might put some people off, the result is unlike any setup i've ever done. Absolutely consistent intonation at any fret. Maybe it's a case of six of one - half a dozen of the other compared to saddle compensation but it really does seem to work.
 
keeping in theme and all. My ES-5V
Green fountain pen ink, black and clear is auto acrylic. Tuners and tail piece are Kluson, pick up is a mini humbucker ( the neck one from the pair I bought for my JR-1 build), Ebony knobs, push pull on the volume to split the humbucker. Headstock logo is 1mm brass inlay. Replaced the fretboard dots with Abalone. Brass nut. (Missing a couple of gold screws for the truss rod cover) .So a few firsts for me, first hollow body, first burst, first inlay attempt,first go at replacing dots. Over all I'm pretty happy with it, it sounds OK acoustically, but really shines plugged in with a tiny bit of reverb.
ES5_zpsfmq0m2lr.jpg

ES5cls_zps47qvalhu.jpg

ES5bk_zpsryswuavz.jpg

ES5hs_zpsxpguqmyz.jpg
 
Back
Top