New music space - or 'A long list of compromises'

blinddrew

Well-known member
Over the last year I've been investigating improving / changing / building some new studio space. At the moment I have a nice enough room but a) the ceiling is more of an amplifier for upstairs space than any kind of baffle and b) my wife and i disagree on the name of the room. We both think the first four letters are S, T, U and D, but she thinks the last letter is a Y rather than the obvious I and O.
So we started digging into options, up to and including moving house. Along the way life has thrown up its usual set of challenges: redundancy, new developments, arsey councils, planning covenants, mortgage terms, stolen motobikes and commuting requirements, future resale, etc. etc. etc.
All of which has led to the current plan that is finally approaching implementation. Hence my starting this thread.
I'll be updating this over the next 3 or 4 months or so (and potentially longer as things carry on and the list of compromises grows).

TLDR: we looked at moving house, extending, building a proper separate building, and finally a 'garden office' space. For the reasons listed above (and others) we've ended up with the last option.
So here's the first set of photos with the clearance work to date.
Before (1):
dg9iYgO.jpg

Before (2):
IIZFlXE.jpg

Chopping the trees and bamboo in prep for the gardener:
0u4RknE.jpg

The gardener's here:
KILw3So.jpg

The gardener's gone:
gKRJWmQ.jpg

Breaking up the concrete:
I2cpDrj.jpg

Digging out the post mounts:
Pyjlom9.jpg

Breaking up the hardcore base:
je5txW6.jpg


So we're currently at 'bombsite' stage and likely to be for the next few weekends as I break up the hardcore base and then it will improve slightly as I level the ground again in preparation for the base installation in 5 weeks.

This is why I'm not getting any other music stuff done! :)
 
Congrats on your studio build!

I built my studio in Adelaide South Australia in the backyard and completed it in 2014. It has been really great to work in but I spent around two years researching how to set up sound isolation, sound treatment, hvac, air con etc see https://smartsonics.com.au/ and how I built it at https://jimmyedson.com/studio/

I found two websites that were very useful - http://www.johnlsayers.com/phpBB2/ and Australian based studio designer John Sayers http://www.johnlsayers.com/

I see you are in the UK but basic principles will be the same.

Regards
Jim
 
Glad you kept those zen looking trees. I’d like something like them growing in my garden, but I’m sure Perth’s climate eliminates that option. Looks like a big job, Drew.
 
Yep the acers are very nice and will be the main feature of the area once we're done. We've actually moved the one on the right about 1m closer to the house - big risk and it's still a bit touch and go but I think it's going to make it. :)
 
Hey bilnddrew. Good luck on you "adventure"!
Just curious, are you pouring a slab and framing from the ground up? Going pre-fab? Transportable?

I've built a couple of in-home studios and happy to share what I learnt along the way when you get to that stage.
I would have loved to have done a self-contained outbuilding like you, but circumstances didn't allow it.

What sucks is we eventually ended up selling both of those properties, so now I'm "studio-less". I'm jealous!
 
We both think the first four letters are S, T, U and D, but she thinks the last letter is a Y rather than the obvious I and O.

Dude, you just made me laugh so loud! This is my EXACT reality with my wife haha

We are going thru the same thing. In need of extra space for studio, sorry study. Plus kids requirements etc. House going on the market soon in search of suitability for the next phase.

Exciting times for you, keep us up to date with your progress.
 
The female of the species can have some very weird thought processes.

We are empty nesters in a fairly large 4 bedroom house and I put dibs on one of the bedrooms some time back, they are now redecorated bedrooms.

We are looking to move and downsize and are looking at 3 bedroom houses one of which I'm allowed to use exclusively for musical duties.

Weird, just weird
 
Hey bilnddrew. Good luck on you "adventure"!
Just curious, are you pouring a slab and framing from the ground up? Going pre-fab? Transportable?
That's compromise number 1! Couldn't get planning permission for a concrete slab build (drainage issues) so it's going to be a pre-fab on piles.
Got a big list of acoustic treatments to sort once it's up. Was thinking of getting started of them in the meantime but I haven't got room to store things in the interim. :rolleyes:
 
at the moment it's just glorified gardening. :)

Looks like a Real Estate Agent's concept of 'gardening'...except you've blotted your copy book by leaving some vegetation.

You'll be swinging that double bass around like it's made of balsa by now.

cheers, Mark.
 
That's compromise number 1! Couldn't get planning permission for a concrete slab build (drainage issues) so it's going to be a pre-fab on piles.
Got a big list of acoustic treatments to sort once it's up. Was thinking of getting started of them in the meantime but I haven't got room to store things in the interim. :rolleyes:

Ah, yes. I suspected it might be on piles, judging by the in-line holes in one of the pics. (thought they could have been removed vegetation though).

The tricky part with building on piles will be sound-proofing the floor, but that also depends on what level of "containment" you require. It can be done though as long as floor, walls, roof go in as separate components. If it's a fully assembled pre-fab unit being set in place with a crane, that's a different story.

Both my studios were on slabs (one in a garage, one in house) so I thankfully didn't need to address that issue.

I'll enjoy watching this thread as much as guitar build!
 
Ah, those holes are actually where I've dug up previous post-mounts from the structure you can see in the first couple of pics.
It'll be built up in sections. The floor is steel, wood, rockwool, steel again, a layer of acoustic plaster-board, then the normal flooring. The whole inside will have a vinyl wrap and then another layer of acoustic plasterboard green-glued on. The windows and doors are laminated acoustic glass. I have no illusions about this though, it'll be better than a 'normal' portakabin but it's not going to give me the levels of isolation that a brick-on-concrete building would.
But I'm not planning on playing real drums in there...
 
wow! that sounds great. You've definitely thought it through.
One thing you might consider for your walls is using resilient mounts. They decouple the gyprock (plasterboard) from the frame work to minimise vibrational transference. They do reduce your wall to wall distance by about 3" (1.5" per wall) but that was acceptable in my scenarios.

After re-reading your last reply, is that what the vinyl wrap is supposed to do, or is for absorption?
 
We went through a similar conversation a few years ago, and had even picked out the portable building we were going to modify. In the end, though, we remodeled the entire house, and we both picked a room for our "studios." Mine is a room in the finished walk-out basement, and hers is upstairs across the hall from the new master bedroom. Mine is, of course, for music, and hers is a sewing room. We both refer to them as "I'll be in my studio today."

Good luck with the build. Always exciting watching someone build their new studio.
 
The vinyl wrap is for air sealant, the green glue is the primary vibration absorber between the wall and the plasterboard.

Thanks PJS, we're looking forward to the separation of spaces. :)
 
The vinyl wrap is for air sealant, the green glue is the primary vibration absorber between the wall and the plasterboard.

Ah, got. Not heard of that glue. Sounds interesting though. Have to look it up out of curiosity. Will keep watching this thread too!

Cheers
 
It's not actually a glue, it's a thermo-elastic paste. Deflection of the two layers causes it to stretch and heat up thus dissipating the energy. Two layers of plasterboard with green glue in between is comparable to 4 layers of non-glued plasterboard across the bulk of the audio spectrum. It's good stuff. :)
 
It's not actually a glue, it's a thermo-elastic paste. Deflection of the two layers causes it to stretch and heat up thus dissipating the energy. Two layers of plasterboard with green glue in between is comparable to 4 layers of non-glued plasterboard across the bulk of the audio spectrum. It's good stuff. :)

Sounds like good stuff. I didn't realise there are going to be 2 layers of plasterboard on the walls either. I reckon you'll be pleasantly surprised at the result and hopefully exceed expectations.
 
The upside to the lousy weather this weekend has been that it's much more pleasant for outside manual labour. Which is good because I've had a lot to do.
If anyone ever mentions to you that they're thinking of putting some bamboo in the garden, give them a slap and show them this picture:
OHsJymQ.jpg

Though you can't really see that well because the wide angle lens foreshortens things, but basically I've had to dig over about a quarter of the garden about 2ft down. More in someplaces. Say no to bamboo.

That meant shifting a lot of earth:
NNp2IHR.jpg


Which would have been much easier if it wasn't liberally scattered with bricks:
Mur7HdR.jpg


So yesterday was digging up, today was laying out:
iHe74FQ.jpg


About six hours later:
hxOu1dJ.jpg


That's actually more progress than I expected to make this weekend, so there's a small chance that I might get round to actually doing some music at some point in the next fortnight... :rolleyes:
 
Back
Top