New Gear Day #2 - Fretworn’s AST-1FB

Fretworn

Well-known member
New Gear Day #2 - Fretworn’s AST-1FB

Yep! I got the first one.

Initial thoughts, which might change when I once I get to look at it in the sunlight on the weekend, is it the best kit I’ve received yet. Of course I dropped the bridge on it first thing, so I have to steam out two very small dings from the top. At the moment I’m seriously considering just Tru-Oiling it.
 

Attachments

  • 608F6AE9-AD68-45F6-AF2C-9A763B7ED8EB.jpeg
    608F6AE9-AD68-45F6-AF2C-9A763B7ED8EB.jpeg
    371.7 KB · Views: 248
Just Tru-oil ??

I'd be wanting to bring that flame out at least a little more than what Tru-oil alone will do... but it's your build...
 
Tend to agree with Marcel and reckon a splash of FW Golden Teak would work well with the red scratch plate and gold screws. Presume gold hardware too?
 
Once I wet down the top to check for glue spots I’ll hopefully get a better idea of how it pop.

It’s my first maple fingerboard, first Tru oil attempt and first micron thick veneer. I’ll be picking a few brains along the way.
 
I’ve checked over the kit now and done a mock build. Apart from a few little things I stand by my comment about it being the best kit I’ve received. I don’t know if these new kits are from a different factory or they are just designed to be a higher grade of product, but colour me impressed so far.

This is the back dry (right) and wet (left). Notice that, apart from the top, it’s a two piece body. Workmanship is pretty consistent across the whole. I believe it’s alder, the guitar itself is surprisingly light.
 

Attachments

  • AFDC8BF3-41BD-45C0-A5E2-DD733C30EAD0.jpeg
    AFDC8BF3-41BD-45C0-A5E2-DD733C30EAD0.jpeg
    491.7 KB · Views: 209
  • F86E74D3-9D5C-432B-AFF2-E494CB12A273.jpeg
    F86E74D3-9D5C-432B-AFF2-E494CB12A273.jpeg
    377.1 KB · Views: 226
Wetting the top doesn’t bring out a lot of contrast, so I will probably have to look at some staining to accentuate the flame. There is a little bit of colour bleed from the binding if you look closely. Also the top is a bit rough and open grained below the f-hole. I need to think about grain filling this.
 

Attachments

  • 90E44F10-AF24-4034-AB28-E2F641D9E636.jpeg
    90E44F10-AF24-4034-AB28-E2F641D9E636.jpeg
    500.3 KB · Views: 177
  • 41E598C3-7814-42C8-B5E7-C1F2B6612D94.jpeg
    41E598C3-7814-42C8-B5E7-C1F2B6612D94.jpeg
    364.4 KB · Views: 158
  • 935AF04C-04D1-438E-BC95-853643545F49.jpeg
    935AF04C-04D1-438E-BC95-853643545F49.jpeg
    356.1 KB · Views: 169
Only glue issues are in the usual areas, the binding in the cutaways. The end grain at the tail end will need a bit of work too.
 

Attachments

  • A509BF46-DD07-42F6-B1A4-9F675F889798.jpeg
    A509BF46-DD07-42F6-B1A4-9F675F889798.jpeg
    336.1 KB · Views: 154
  • E2676511-56FC-420B-9A42-BCB90A24F87E.jpeg
    E2676511-56FC-420B-9A42-BCB90A24F87E.jpeg
    247.8 KB · Views: 153
  • 60D74C40-5F15-408E-B970-E1F02D120FAE.jpeg
    60D74C40-5F15-408E-B970-E1F02D120FAE.jpeg
    278.9 KB · Views: 153
The neck is dead straight. The dots are centred. Even the tuner holes are almost aligned, the A string is slightly out. And it came with a black nut to match the binding.
 

Attachments

  • B430E14D-19CF-495E-B679-527A9AC13F8C.jpeg
    B430E14D-19CF-495E-B679-527A9AC13F8C.jpeg
    307.9 KB · Views: 159
  • A0E7A90C-B23A-4BC0-A1F2-B50BAB6528DD.jpeg
    A0E7A90C-B23A-4BC0-A1F2-B50BAB6528DD.jpeg
    368.7 KB · Views: 153
  • 329D13F2-C43B-4367-8E67-D9029DF8ED6A.jpeg
    329D13F2-C43B-4367-8E67-D9029DF8ED6A.jpeg
    272.8 KB · Views: 139
The veneer is pretty thin, but there were no glue spots that I could see on the front.
 

Attachments

  • 428ABB2B-AA87-4543-9F6F-2AA6AE82CD8F.jpeg
    428ABB2B-AA87-4543-9F6F-2AA6AE82CD8F.jpeg
    148 KB · Views: 165
  • 29487CCF-9633-4FDC-8D25-F5AFA57FA08C.jpeg
    29487CCF-9633-4FDC-8D25-F5AFA57FA08C.jpeg
    119.9 KB · Views: 150
I’ll have to ditch the black plastic saddle for the neck plate as the holes were drilled too close to the edge. BTW it came with the holes drilled in the neck as well, and they lined up perfectly. The neck fits snug and straight and the scale length seems to be perfect.

The jack plate doesn’t fit snuggly though, I may have to enlarge the hole a fraction, but I need to check if the orientation to the jack itself is effecting it.

The routing appears to be deep enough for the upgraded switch. Its hard to tell from the picture but there is about a mm clearance.
 

Attachments

  • DA3950E8-0B7A-4DC9-BC6C-D562B64D1E0E.jpeg
    DA3950E8-0B7A-4DC9-BC6C-D562B64D1E0E.jpeg
    137.9 KB · Views: 162
  • EAB39A68-5572-4B5F-9C54-F4BE32E12862.jpeg
    EAB39A68-5572-4B5F-9C54-F4BE32E12862.jpeg
    102.5 KB · Views: 158
  • 75823CDB-6301-409E-860A-F93ED748C5CA.jpeg
    75823CDB-6301-409E-860A-F93ED748C5CA.jpeg
    332.2 KB · Views: 163
What a beautiful kit Fretty. I'm a little jealous. Well maybe ill be the second for the new kits we'll see.
 
The headstock is now shaped and the neck sanded to 240.
 

Attachments

  • 30A108B3-701D-4AA7-ABD3-99BA61D68D01.jpeg
    30A108B3-701D-4AA7-ABD3-99BA61D68D01.jpeg
    547.5 KB · Views: 149
  • 73393464-332A-43AD-9F32-B7DDA86B10BF.jpeg
    73393464-332A-43AD-9F32-B7DDA86B10BF.jpeg
    429.8 KB · Views: 151
I’ve been testing colours as well. FW Golden Teak, with or without popping the grain with FW mahogany first. I’m going to test Tru-oil in the tremolo cavity to see if the back can get away with just that. I really like the natural colour of the alder.
 

Attachments

  • 87D8C918-FF41-40F0-B958-6B6FE3572A87.jpeg
    87D8C918-FF41-40F0-B958-6B6FE3572A87.jpeg
    244.4 KB · Views: 145
  • 0E14CA6E-FDF0-483C-862E-6E8A479B36AE.jpeg
    0E14CA6E-FDF0-483C-862E-6E8A479B36AE.jpeg
    355.9 KB · Views: 156
Back
Top