New Boss Katana 100W 1X12 Amp.

DrNomis_44

Well-known member
Hey Everyone,

This fortnight it's official, I am finally going to be ordering a brand-new Boss Katana 100W 1X12 amp direct from Boss Australia, I'm also going to be ordering the optional GA-FC foot controller, plus the BAC-KTN100 amp cover for it as well as the BCC-3-TRA interconnect cable and two instrument leads, so, fun times ahead for me.


This is the Boss Katana amp I'm going to be buying online, direct from Boss Australia:

https://www.boss.info/au/products/katana-100_mk2/
 
Last edited:
Nice. That should shift some air.

Sent from my Pixel 4 using Tapatalk

Not only that, it'll give my poor back a break from lugging my Marshall MA100C amp to and from live gigs, my back and shoulders was a bit sore the last time I lugged it to a live gig and back home again.
 
I have the Head and love it!
I play usually with a 2x12 V30 (Rock) or 1x12 Warehouse Cabinet (Acoustic)

Easy to dial in good tones, and if you deep dive you can "simulate" anything you want.

I prefer Brown Sound on the edge of breakup and 1-2 pedals (TS, RAT) in front of it. Cleans nicely up with the Volume Poti on the guitar.

I also use the acoustic channel quite often just little bit reverb/delay – works great.

Played many gigs and rehearsals with it and never let me down!

Cheers
Dominik
 
I have the Head and love it!
I play usually with a 2x12 V30 (Rock) or 1x12 Warehouse Cabinet (Acoustic)

Easy to dial in good tones, and if you deep dive you can "simulate" anything you want.

I prefer Brown Sound on the edge of breakup and 1-2 pedals (TS, RAT) in front of it. Cleans nicely up with the Volume Poti on the guitar.

I also use the acoustic channel quite often just little bit reverb/delay – works great.

Played many gigs and rehearsals with it and never let me down!

Cheers
Dominik

I've got a 200W Ashton Quad Box loaded with four 12 inch Celestion Rocket 50's, the cab is rated at 8 Ohms, I wonder if I'll be able to plug my new Boss Katana 100 amp into it?
 
You could, as the Katana 100's speaker is an 8 ohm unit. But unlike the Artist version, it's hardwired to the speaker, with no speaker jack output (only the head versions have speaker outputs). So you could make up a flat spade to jack speaker lead and use the existing output push-on spade connectors, or you could possibly modify it to add your own speaker output jack. With a disconnect type jack, you could have it wired in-line with the internal speaker, so the internal speaker gets disconnected when you plug an external speaker in.

I expect it's got two of the 50W power amp modules from the 50W Katana inside, running in bridge mode. If so, it won't like anything less than 8 ohms, so you can't leave the internal speaker connected in parallel. I can't find a wiring diagram for it, but better to be safe than sorry.
 
You could, as the Katana 100's speaker is an 8 ohm unit. But unlike the Artist version, it's hardwired to the speaker, with no speaker jack output (only the head versions have speaker outputs). So you could make up a flat spade to jack speaker lead and use the existing output push-on spade connectors, or you could possibly modify it to add your own speaker output jack. With a disconnect type jack, you could have it wired in-line with the internal speaker, so the internal speaker gets disconnected when you plug an external speaker in.

I expect it's got two of the 50W power amp modules from the 50W Katana inside, running in bridge mode. If so, it won't like anything less than 8 ohms, so you can't leave the internal speaker connected in parallel. I can't find a wiring diagram for it, but better to be safe than sorry.

For sure, maybe the best thing to do is leave it as it is, I could always buy the head version at a later date when I can afford it.
 
The amp/speaker modelling is obviously based around the stock speaker's response (which is generally considered a bit bass light), so you'd definitely get more bass with the 4x12", but some of the models may sound less authentic as a result. But regardless of being 'authentic', some may sound better and some may sound worse. You'll just have to find out if you try.
 
Update:

Okay, so after a bit of frustration (I'll explain shortly) I've finally got my new Boss Katana amp ordered online.


So why was it a bit frustrating?, I hear you ask, just before I did the online order I had to wait till Windows Update finished updating my computer, then while I was in the middle of doing the online order my internet decided to randomly drop-out, so I had to restart my computer a few times to fix it, nothing's worse than trying to finalize a payment for an online order and end-up having to go through it all again just because your internet decided it was a great time to chuck a big hissy-fit, anyway I think it's fixed now though.....touchwood.


Here's a bit of trivia for you, when you look at the front of the Boss Katana amp, you'll notice a strange symbol under the word Boss, that is the Japanese Kanji (writing) for the word "Katana", in the Japanese language the word "Katana" means "Sword", most western people pronounce the word "Katana" with more emphasis on the "ta" with a longer "ah" sound, but the correct way to pronounce it, as Japanese people do, is "Ka-ta-na", pronouncing each syllable in quick succession.


The Japanese Katana, is a single-edged sword with a curved blade that's usually about 32 inches in length, it's history goes back more than 500 years, traditionally they are hand-forged from a special kind of steel called Tamahagane, which is made from iron-rich sand, there's actually two types of Tamahagane used to make the blade of the Katana, one type has a low carbon-content and is soft, but tough, the other type has some carbon-content in it and is a lot harder, the ancient Japanese swordsmiths soon worked out how to combine the two types of Tamahagane so that they could create a sword that would not shatter, but would still retain a very sharp edge, during the hardening-process, the Katana acquired it's characteristic curved blade as the two different types of Tamahagane cooled at different rates.
 
Last edited:
Look at what just arrived in the post, literally a few minutes ago!!!!

My new Boss Katana 100 MkII guitar amp I recently ordered online, as you can see, my two pet cats are doing their regular initial routine customs inspection, fortunately they found nothing suspicious....apart from me....lol.

New Katana 100 MkII Amp_resized.jpg

That little black parcel on top of the big box contains the optional foot controller I ordered along with the amp.


Here's a pic I took of the new Boss Katana 100 MkII, after unboxing it:

Boss Katana Unboxed_resized.jpg


If you're going to buy one of these amps, I would very strongly recommend buying the optional GA-FC Foot Controllers to go with it, it only works with the Katana 100 MkII though, the GA-FC Foot Controller gives you a very convenient way to switch to any of the four channels while you're onstage.
 
Last edited:
That amp is only about 4 cats in size...

if cats were a unit of measurement.

Yeah...hahahaha....the thing is, my two cats think they are way-cooler than me, they always get all the groupies, while I always get all the lawsuits, and bad record label deals....lol.


I may have to have a few stern words with my two cat roadies/security staff....lol.


I'm going to put the new sticker-labels on the foot controller first and then plug the controller into the amp before I fire this bad boy up.


Incidentally, the amp doesn't seem to have suffered any damage while it was being transported up to Darwin, thank goodness.


This is a brand-new era for me, and I am extremely excited about it, who doesn't love new things?


Just did a quick play-test of my new Boss Katana 100 Mk II amp and ...Wow!!

For a solid-state Digital Modelling amp, this thing sounds really good, clean tones are nice and warm, just like maybe a Fender Twin, the crunch, lead, and Brown tones are some of the best distortion sounds I've ever heard coming from a solid-state amp, usually the distortion tones that you get from most solid-state practice amps tend to sound a bit harsh and "Transistor-like", the distortion tones coming out of the Boss Katana 100 MkII are more like what you'd get coming out of a tube amp like for example a Marshall, I didn't have to do much tweaking of the tone controls to get a good sound, I left the Bass, Mid, and Treble tone controls all on the 12 O clock setting....bam!!!! instant good tones with my Fender USA Strat and it's 3X Fender N4 Noiseless pickups....instant Marshall tones, sounds a lot like my Marshall MA100C 100W all tube amp, but maybe a touch less harsh, mind you, I haven't tried the other 5 amp type settings....yet, anyway, I'm getting some great sounds out of the amp that are perfectly usable in a live gigging situation, by the way, this amp is loud, even on the 50W setting with the master volume set half-way up.


The Australian Recommended Retail Pricing of the amp is just over Au$600.00, which I think is quite affordable, given that my Marshall MA100C amp cost me around Au$1,300.00 or so, don't get me wrong, I still love all my amps, but the Katana 100 MkII for me is a more practical gigging amp, it does weigh a bit less than my Marshall MA100C, a bit less back-breaking.


So, I'm happy with my new Boss Katana 100 MkII amp, can't wait to start gigging with it, I'm definitely going to see if I can get it's software updated, and will see if I can get the optional tone software installed on both my studio desktop pc and new Acer laptop today.
 
Last edited:
Got the Boss Tone Studio and the Windows 10 Driver for the Katana installed, had some trouble getting the amp to connect to the tone studio software, turns-out I had to do a system firmware update on the amp to fix it, anyway, it's all up and running with my studio pc now, next step is to get it working with my laptop.
 
Look at what just arrived in the post, literally a few minutes ago!!!!

my two pet cats are doing their regular initial routine customs inspection, fortunately they found nothing suspicious....l

The hell they are, they are thinking " get the bl00dy thing out of the box so we can play in it " ;)
 
The hell they are, they are thinking " get the bl00dy thing out of the box so we can play in it " ;)


Hahahaha.....more than likely, I never quite know what my cats are thinking most of the time, they keep treating me like a mushroom......etc, etc, etc.....you know......lol.


Which reminds me of the time I woke up on my bed, not knowing how I got there, turns-out my two cats spiked my drink as revenge for taking them to the vets, I woke up to see both of them sitting on my chest, looking directly at me with broad, malicious grins on their faces, I thought to myself..."Oh no, not again!".
 
Last edited:
Enjoy doc! I have the katana head, and love it (and I've only spent a little bit of time fiddling with the settings - I reckon you could spend forever playing with it)
 
Enjoy doc! I have the katana head, and love it (and I've only spent a little bit of time fiddling with the settings - I reckon you could spend forever playing with it)

Unfortunately, I needed new strings for my two Fender guitars and my Jackson Superstrat, I was planning on buying some new strings yesterday, but found-out that Darwin has been put on lockdown due to some Covid-19 infections, I was able to online-order a box of 25 sets of DÁddario Super Light strings from Stewmac, but they'll take anything up to 4-weeks to arrive in the post, so, no more guitar-playing till then for me.


Things I like most about my brand-new Katana 100 MkII....

* Has great clean,crunch, and distortion sounds.

* Has great reverb and effects built in, I particularly like the Tremolo effect, sounds great with a bit of reverb.

* The controls are all super-intuitive, no endless menus to scroll-through.

* Boss's Tube Logic definitely does get that tube amp sound, even though the Katana 100 MkII is a solid-state digital-modelling amp.

* The optional GA-FC foot controller works perfect with the Katana 100 MkII.

* The Katana 100 MkII seems to weigh less than my Marshall MA100C, so it's easier to tote to gigs.


So, I'm very happy with it, it ticks all the boxes for me, can't wait to start gigging with it.


I can see why Boss have won some awards with the Katana series of amps.


I remember playing through a 75 Watt Line-6 Spider IV amp that they had at the contemporary music department at uni, to my ears, the Line-6 Spider IV amp, in comparison to the Boss Katana 100 MkII, has a very "Digital" sound to it that's very hard to dial-out, the Katana 100 MkII sounds a lot more amp-like to my ears.


If anyone is looking for a decent practice amp, or gigging amp that has some great sounds, then I would very strongly recommend seriously looking at buying one of these Katana 100 MkII amps, they are rated to put-out 100W, but, they do include a panel-mounted power switch that you can use to dial-back the output-power to 50W, or .5W, there's also a standby setting as well that you can use for silent recording into Daw software, definitely worth the money.
 
Last edited:
I was able to online-order a box of 25 sets of DÁddario Super Light strings from Stewmac, but they'll take anything up to 4-weeks to arrive in the post, so, no more guitar-playing till then for me.

There are plenty of online retailers in AUS that sell D'Adarrio's in bulk. Not sure why you went overseas. With the current condition of the AUD/USD and shipping, the domestic prices are pretty reasonable (from the right seller).

Also, it would take a whole lot more than dead strings to keep me from playing!
 
Back
Top