My latest non-PBG build: The Stra-Tele

McCreed

Well-known member
I think I actually started this build in August '18 and *lots* of "stuff" happened since then... but now it's D-U-N, dun!

My "hybrid" design features:
Basswood Tele body; 22 fret Maple/Rosewood neck; bone nut; Realtone (Jin-Ho) tuners; "Custom" 3-ply Strat pickguard; Fender Vintage Noiseless Stratocaster pickups; Tele control plate w/ 1V 1T + 5-way switch; Realtone hardtail bridge w/ steel block saddles; LP-style steel jack plate.

I did a very simple alternative wiring scheme for the 5-way switch that gives me the following positions and combinations:
1: Neck
2: Neck & Bridge
3: Bridge
4: Middle & Bridge
5: Middle

Yes, you sacrifice the Middle & Neck combo, but gain the 1-2-3 of the tele. Personally, I don't mind the trade off.

Finish:
"Deep Aqua" acrylic lacquer base coat with ac/lac clear coat. Wet sanded to P4000 then Micro-Gloss polished.
Also the the body features forearm and belly contours. I've decided those a must for me on a tele :^)
It weighs in at a featherweight of 3.1kg (6 lbs 13 oz)

Oh btw, it plays and sounds awesome!!!
 

Attachments

  • Stra-Tele 1500px.jpg
    Stra-Tele 1500px.jpg
    297.1 KB · Views: 237
Great concept and very well executed. Any chance of a sound demo?

Sent from my SM-G955F using Tapatalk
 
Great concept and very well executed. Any chance of a sound demo?

Sent from my SM-G955F using Tapatalk


Thanks G-Axe.
As for a demo, if it happens it will be a while. My recording skills and gear are limited but I am at least capable.
I've been thinking about putting up a new sound-cloud page just for demos such as this. I'll post a link if that happens.
Thanks again.
btw, I used to live Canberra (1999-2004 and 2013-14) I wonder if we ever met? It's a pretty small place really.
 
Thanks G-Axe.
As for a demo, if it happens it will be a while. My recording skills and gear are limited but I am at least capable.
I've been thinking about putting up a new sound-cloud page just for demos such as this. I'll post a link if that happens.
Thanks again.
btw, I used to live Canberra (1999-2004 and 2013-14) I wonder if we ever met? It's a pretty small place really.
There's a pretty good chance - mind you I'm fairly confident I was drunk from 1998-2004, so my memory is a bit hazy. :)

Sent from my SM-G955F using Tapatalk
 
I think I actually started this build in August '18 and *lots* of "stuff" happened since then... but now it's D-U-N, dun!

My "hybrid" design features:
Basswood Tele body; 22 fret Maple/Rosewood neck; bone nut; Realtone (Jin-Ho) tuners; "Custom" 3-ply Strat pickguard; Fender Vintage Noiseless Stratocaster pickups; Tele control plate w/ 1V 1T + 5-way switch; Realtone hardtail bridge w/ steel block saddles; LP-style steel jack plate.

I did a very simple alternative wiring scheme for the 5-way switch that gives me the following positions and combinations:
1: Neck
2: Neck & Bridge
3: Bridge
4: Middle & Bridge
5: Middle

Yes, you sacrifice the Middle & Neck combo, but gain the 1-2-3 of the tele. Personally, I don't mind the trade off.

Finish:
"Deep Aqua" acrylic lacquer base coat with ac/lac clear coat. Wet sanded to P4000 then Micro-Gloss polished.
Also the the body features forearm and belly contours. I've decided those a must for me on a tele :^)
It weighs in at a featherweight of 3.1kg (6 lbs 13 oz)

Oh btw, it plays and sounds awesome!!!

Two thumbs up from me. Great job!
 
Back
Top