Lookin' for a lefty who wants a reverse headstock deal.

Andy40

Well-known member
Okay just putting it out there.

I really want an ST-1 with a reverse headstock. I don't really want to custom order and wait till August.

If you are a lefty and like strats maybe we can help each other.:o

I am thinkin' we go halves in a left handed ST-1L and a right handed ST-1 and get the guys at pitbull to swap the necks over.

Then we both get a reverse headstock!

Wokks, if this isn't going to work because of the heel cut speak now!

If you are interested PM me.....no pressure Stan....

If there's no interest, thats okay too...it was just an idea.
 
I'm only a fence-sitter at the moment.
However, I'd been interested experiencing the strat like Hendrix had to deal with.
Having the tremolo, pickups and volume/tone knobs the wrong way also.
If I had the money of course.

cheers, Mark.
 
I'm only a fence-sitter at the moment.
However, I'd been interested experiencing the strat like Hendrix had to deal with.
Having the tremolo, pickups and volume/tone knobs the wrong way also.
If I had the money of course.

cheers, Mark.

I was thinking of a right handed body with a lefty neck so the switch and volume and tone knobs would be normal.

I'm no genius like Hendrix lol
 
Hi Andy, you could always email Adam to see if he would be prepared to put one together for you and offer the reversed Lefty version as a special in the store?

Had a look at just the necks and they all looked right handed so not sure if he carries any spare lefties?
 
Nah it's gotta be a custom order waz. Thanks for thinking of me though. It's not a major deal for me, just was interested if easy. I think I would have a bunch of other custom orders I would do first!!!
 
Heres a confusing question, if I got a left neck on a righty body, would I use lefty tuners?:confused:
 
Hey Andy just saw this thread. The neck heel shape of left and right hand necks should be the same shape.
I made the mistake of the pine end grain tele had a reverse headstock but had right hand tuners for it. No big deal but the eagle eyed people would pick out the tuners were upside down haha

I think if you emailed Ads and asked for a reverse headstock he should be able to interchange on a ST-1 kit if he has left hand necks in stock but maybe you are saying they are out of stock till August and the ones he has may be in left handed kits
 

Attachments

  • 17499251_1335218903212209_9023382595582465504_n.jpg
    17499251_1335218903212209_9023382595582465504_n.jpg
    138.8 KB · Views: 193
Last edited:
Being a new player I'm finding the 42mm width at nut too tight.
Good quality but too narrow.
The standard nut width for Strats/Teles is either 42mm (Squires, Mexican, Japanese) or 42.8mm (USA). Almost all Asian-made Fender-style necks will have the 42mm width.

So unless you go for a custom build, you aren't going to find anything significantly wider.

Just persevere and you'll get used to it.
 
Great stuff Waz!

Are you going to check out the Wood Expo next weekend?

Hi Andy, was not on my radar as I work most Saturdays and not paying much attention to what's going on in the nearby regions. Quick google search indicated that Maleny Wood Expo was held 29 April or were you referring to another one?
 
@ Waz Yeah theres one at the RNA showgrounds next weekend

Timber & Working With Wood | Brisbane
Details
When: 26 to 28 May 2017
Where: RNA Showgrounds, Bowen Hills
Times: 10.00 am - 4.00 pm each day
Admission: Adult $16, Concession $14, Children (Under 14) when accompanied by an adult on Saturday & Sunday are Free. Multi-Day pass discount available. Please note: all ticket purchases are non-refundable, thank you

@ Wokks, thanks for confirming that reverse neck heel thing. I knew you'd know. I did email ads about the kit but didn't want to stretch the acquaintance just yet.

I was holding off on this to see if there was any interest, but I think I'll want till after the wood show as i am contemplating a semi-scratch build....
 
Nothing like diving in at the deep end???

I don't have the tools to do a scratchie and would struggle to come up with an original design as I figure there is no point copying something else if you do go down that path.

Also running out of places to hide, err, umm, store these builds anyways thus ruling out the need to buy a router and all the other fancy things required.
 
I've been contemplating a semi-scratch build for a long time. I think i have the patience now. I'll be using a pitbull neck.

I dont really want to do an original design, instead use different materials/design to the diy kits.

I really really want to build a Johnny Lang Tele.

I'll get there one day....
 
The standard nut width for Strats/Teles is either 42mm (Squires, Mexican, Japanese) or 42.8mm (USA). Almost all Asian-made Fender-style necks will have the 42mm width.

So unless you go for a custom build, you aren't going to find anything significantly wider.

Just persevere and you'll get used to it.

Interesting comment, thanks.

I have a few US Strats and I measured nuts as 43mm (close enough to 42.8)
On these E to E string is 36mm, I'm happy with that spacing.

The neck I'm having a problem with is, 42mm nut & 32.5mm E to E.

That 3.5mm is making a big difference between clean or messy chords :-(

PS, I just measured my US Tele, it's also 43mm & 36mm, the same as my Strats.
My Mex Jazzmaster is 42mm & 36mm, so it looks like 36mm E to E is is what I've become comfortable with.
 
I've been contemplating a semi-scratch build for a long time. I think i have the patience now. I'll be using a pitbull neck.

I dont really want to do an original design, instead use different materials/design to the diy kits.

I really really want to build a Johnny Lang Tele.

I'll get there one day....
Have crack at a neck Andy, it's not that hard, just make sure you stat off with square stock, particularly if you are going to build laminated neck blank.
 
Back
Top