June 2016 Guitar of the Month (for Guitars and Basses finished in May 2016)

adam

Well-known member
[h=2]June 2016 GOTM[/h]
Enter your finished guitar or bass here to be judged for Pit Bull Guitars June 2016 Guitar of the Month.

Please remember:

For Guitars or Basses finished in (or before) May 2016

One guitar/bass per member per month
It must be a Pit Bull Guitars kit (mods and upgrades acceptable)
Guitar or Bass must be finished and playable


We need at least 4 photos:
· full guitar shot from the front;
· close up of the body finish;
· shot of the back of the guitar; and
· close up of the headstock (please, no brand name logos)



Please post your photos in this thread. If you are having issues posting photos on the forum, please email them to adamboyle (at) pitbullguitars (dot) com

Please note: This competition is open to amateur guitar builders only. If you are making and selling guitars for profit, you are ineligible.

Competition for June closes 31 May 2016.
​
 
29b3c3fa4bca0d1769295f378cd01a3e.jpg
75bacc0b49585127d7f4c8bf7c787eae.jpg
a84c0e38c69f3a16bfb38081bf8627de.jpg
4f36ee8394fa6f1196d0a57997c3e88d.jpg


Verstuurd vanaf mijn D6603 met Tapatalk
 
Figured I'd enter my LP1S

As you can see she has a maple fretboard with custom inlays I fashioned from Fender pearloid green guitar picks.

The truss rod cover isn't on yet because she still needs finetuning i will also be taking her to a luthier for a nut and fret job.

The finish is a transparant acrylic paint with Tru oil over the top I didn't go for an extremely glossy finish but it has some shine to it.

The pickups are the infamous Seymour duncan Jb/'59 Combo

Here's the build diary: http://www.buildyourownguitar.com.au/forum/showthread.php?t=5549
 
He he, all those empty slots in your guitar rack......your LP looks a little lonely mate;)
That rack is emty because i finally convinced the missus to ley me hang my guitars on the wall a while back but I'll fill it up soon enough :D got a bunch of kit ideas floating around up here.

Verstuurd vanaf mijn D6603 met Tapatalk
 
Was it a deliberate choice to put the bridge pickup in back to front from usual? Love the green colour
 
Was it a deliberate choice to put the bridge pickup in back to front from usual? Love the green colour
It's actually the neck pickup that's back to front as the holes in the covers are over the magnets and not the screws i wasnt sure if i was supposed to unscruw the screws in the pockups for the cover so i didn't.

The neck pup ended up the other way round by accident, would it change the tone in any way?

Verstuurd vanaf mijn D6603 met Tapatalk
 
Usually the exposed polepieces are at the bridge end of the bridge pickup and the neck end of the neck pickup. To be honest I don't know if it makes a difference. If you Google it you find people who say it does matter and others that don't. The DiMarzio website says it depends on the design of the humbucker, but most pickups it makes no difference.
 
cool looking build Joe and first LP I've seen with a maple fingerboard really suits the green with the green inlays.
I doubt whether the reversed bridge pup will make much difference to the sound, which side was the wire exiting the pickup, on the control cavity side or opposite ?
 
cool looking build Joe and first LP I've seen with a maple fingerboard really suits the green with the green inlays.
I doubt whether the reversed bridge pup will make much difference to the sound, which side was the wire exiting the pickup, on the control cavity side or opposite ?
Thanks that's the reason i built it, couldn't find a commercially available green lp with maple frets.

The pup wires were on the right side of the cavity i think the mixup happened when i was putting the ring on i guess.

Verstuurd vanaf mijn D6603 met Tapatalk
 
sure Joe, the bridge pup wire wouldn't be long enough if it exited the opposite side of the control cavity.
Now it's finished must be time for a video/sound demo ?
 
sure Joe, the bridge pup wire wouldn't be long enough if it exited the opposite side of the control cavity.
Now it's finished must be time for a video/sound demo ?
There is a rough setup video in my build diary and in the designated forum section, she's currently at the guitar tec's house getting her nut slots filed and frets straightened.

Verstuurd vanaf mijn D6603 met Tapatalk
 
Michael Guitar of the month entry exotic ash explorer

Hi all, my name is Michael, i would like to thank Pitbull for giving me the opportunity of the first guitar i've ever built(it was made around july last year) the attached picture is my 7 string exotic ash explorer, hand carved and finished by me, it's my first project so i didn't expect to make it perfect e.g the carvings are abit off on some area, and the finish is alittle messy. Anyway i'd like to enter the competition for build of the month, and i'm looking at possibly purchasing another kit soon for my second project, for my next build i would like to request a 6 string ash explorer with ebony fret board, block inlays, les paul custom type binding on body and binding on fret board, and a floyd rose original trem with locking nut, i could source my own hardware as long as the cavities are cut. :)
 

Attachments

  • 13151976_629526377197949_9124486800812344035_n.jpg
    13151976_629526377197949_9124486800812344035_n.jpg
    152.5 KB · Views: 380
  • 10986505_504541323029789_3547365817933737459_n.jpg
    10986505_504541323029789_3547365817933737459_n.jpg
    92.8 KB · Views: 288
  • 11698679_510245165792738_1839032410386751175_n.jpg
    11698679_510245165792738_1839032410386751175_n.jpg
    83.1 KB · Views: 269
Hey Michael, awesome build. You need to submit pics of a close up of the headstock, close up of front body and the back of the guitar.
 
more pics of my 7 string explorer
 

Attachments

  • thumbnail_20160521_131902.jpg
    thumbnail_20160521_131902.jpg
    288.2 KB · Views: 263
  • thumbnail_20160513_175226.jpg
    thumbnail_20160513_175226.jpg
    151.3 KB · Views: 276
  • thumbnail_20160513_175508.jpg
    thumbnail_20160513_175508.jpg
    264.9 KB · Views: 260
  • thumbnail_20160521_131810.jpg
    thumbnail_20160521_131810.jpg
    271.1 KB · Views: 250
  • 13151976_629526377197949_9124486800812344035_n.jpg
    13151976_629526377197949_9124486800812344035_n.jpg
    152.5 KB · Views: 260
Back
Top