July Guitar of the Month Competition (for Guitars and Besses finished in June 2016)

adam

Well-known member
July 2016 GOTM
Enter your finished guitar or bass here to be judged for Pit Bull Guitars July 2016 Guitar of the Month.

Please remember:

For Guitars or Basses finished in (or before) June2016

One guitar/bass per member per month
It must be a Pit Bull Guitars kit (mods and upgrades acceptable)
Guitar or Bass must be finished and playable


We need at least 4 photos:
· full guitar shot from the front;
· close up of the body finish;
· shot of the back of the guitar; and
· close up of the headstock (please, no brand name logos)


Please post your photos in this thread. If you are having issues posting photos on the forum, please email them to adamboyle (at) pitbullguitars (dot) com

Please note: This competition is open to amateur guitar builders only. If you are making and selling guitars for profit, you are ineligible.

Competition for July closes 30 June 2016
 
My IB-5 which was a bunch of fun to build, all stock hardware, changed the fret dots, hand painted(clearcoat was rattlecanned) body and headstock, neck is stained and cleared and the fret board is stained and oiled.
I think it came out okay:D
 

Attachments

  • ForumRunner_20160607_120834.png
    ForumRunner_20160607_120834.png
    704 KB · Views: 391
  • ForumRunner_20160607_120854.png
    ForumRunner_20160607_120854.png
    745.7 KB · Views: 371
  • ForumRunner_20160607_120913.png
    ForumRunner_20160607_120913.png
    737.5 KB · Views: 348
  • ForumRunner_20160607_120925.png
    ForumRunner_20160607_120925.png
    819.7 KB · Views: 373
  • ForumRunner_20160607_120937.png
    ForumRunner_20160607_120937.png
    696.2 KB · Views: 366
my SG F1 i named her Sic-Sigbon GS
 

Attachments

  • 13344612_642059939277926_5708203379925087005_n.jpg
    13344612_642059939277926_5708203379925087005_n.jpg
    111.8 KB · Views: 434
  • 13427746_642059685944618_637842283857007504_n.jpg
    13427746_642059685944618_637842283857007504_n.jpg
    64.5 KB · Views: 341
  • 13418838_642059679277952_8041405336094159421_n.jpg
    13418838_642059679277952_8041405336094159421_n.jpg
    54.9 KB · Views: 410
  • 13428562_642059789277941_271075361466527137_n.jpg
    13428562_642059789277941_271075361466527137_n.jpg
    153.1 KB · Views: 380
Crikey new builds are popping everywhere a good effort on a cool SG. Please tell us how you got the look
 
i hand sketched the wood burn design, then did the wood burn, the finish is jarrah and teak stain, only put on 2 coats each. finalised with (50% satin 50% gloss clear varnish 2 coats also) i don't like too many coats of finishes on guitars.
 
New entry from adammmcarthy, who was having issues posting:

"so this is my lefty explorer, my first ever real left handed guitar...
its all standard straight out of the box. stained with japan black and white wash from the hardware shop, lotsa sanding. then finished with dingotone clear."

Adam EX-1L 01.jpg Adam EX-1L 02.jpg Adam EX-1L 03.jpg Adam EX-1L 04.jpg
 
My RCA-4 all finished :-)
All I have changed on this kit is the bridge (purely for looks), and the 3 way switch. Although the Jetglo Rick has always been on my list of wants, I wanted something unique and thought a carbon effect would tick both boxes. I used rattle cans for primer, base coat, carbon effect, and clear coat. The kit went together very well, the action is nice and low and it plays a treat.
1.jpg2.jpg3.jpg4.jpg
 

Attachments

  • 5a.jpg
    5a.jpg
    341.1 KB · Views: 387
Last edited:
wicked build Pumpy first I've seen a build with the carbon fibre effect. My only concern is the full width of the E string doesn't reach the nut so the thinner part of the string may rattle around in the nut slot. Must be the new bridge you put on the strings must be anchored further away
 
Thank you for all the comments :-)
My mistake with the head pic, wrong one posted but edited with the right one now. I used the stock strings for set up as I don't like taking strings on and off. Wokkaboy you're right, the new bridge meant I needed to change the strings for long scale but I always use the same make strings on all my basses so they were always going to be changed.
 
ah good stuff Pumpy that headstock pic looks much better and the E string reaches the nut ok. What type and gauge strings do you use ?
 
I buy all my strings from Status Graphite in the UK, for 4 strings I use 40-100, and on my 5's I use 40-125, all round wound. I tried different gauges and types over the years but this seems to work well for me.
 
Looks great. String gauge is a bit lighter on the G than stock standard 45 but if it works for you all good.

Just wondering what the name on the headstock means?
 
Hello this is my finished guitar, looks and sounds fantastic!
The head stock Logo is my name, the fine writing on the back says Rockabilly Rules, no alterations what so ever, all material bought from Pitbull Guitar, I love playing it, sounds fantastic and by the way it's my very first kit, loved every seconds working towards what it is today..

WP_001335.jpgWP_001342.jpg
WP_001337.jpgWP_001341.jpg
WP_001339.jpg
 
Last edited:
So, the headstock name :-)
I wanted to get away from the type of names and font normally associated with this style bass, if it's a unique build then I think the name and style should also be unique.
My wife lets me do my many 'little projects' with no complaints :-) so I decided to name the bass after her. Her name is Ildiko, she's Hungarian and her family have always called her Ingyom. It's pronounced Indyom, the 'GY' is the same sound as 'DY' in English. Her Dad has always called her Ingyomka, and thats how I got there. Hungarian 101 :-)
 
Hey Caesar nice build well done. Just need a close up of the headstock please. Love the natural sides and neck look really cool with the red back and front.
I'll give you a tip some well focused outdoor photos in good light of the axe will give you a much better chance of scoring well !
 
Last edited:
Back
Top