Guitar of the Year 2016 (Non-Pit Bull Guitar kits and Scratch Builds)

adam

Well-known member
Enter your finished guitar or bass here to be judged for the Non-PBG/Scratch Build/Re-furbish Guitar of the Year for 2016 .

Any Guitar or Bass built from scratch or fully restored/refurbished/refinished, or kit purchased from another company is eligible, as long as it is your work.

A Poll will open in mid-December 2016 and all registered members will be able to vote on the guitar or bass they believe is the best.

RULES:

For non-PBG Guitars or Basses finished before December 31, 2016

One guitar/bass per member per year
Guitar or Bass must be finished and playable
Please include least 4 photos:
· full guitar shot from the front;
· close up of the body finish;
· shot of the back of the guitar; and
· close up of the headstock (please, no brand name logos)

Restored/Refurbished/Refinished guitars or basses must include a "before" shot as well as the 4 "after" shots.

Please make sure your photos are less than 1500px on the longest edge.

This competition is open to amateur guitar builders only.

Competition for 2016 closes 31 December 2016.
 
The Diablo Diddly box Part Bo Diddly part cigar box and 100% evil. Neck is from Pitbull, the rest is scratch built or from my extensive pile of junk and left overs
bo1_zpsx3x1phfs.jpg

Bo3_zpspspss6qw.jpg

Bo2_zpsd8ho84en.jpg

bo4_zpsqhe3md0j.jpg
 
I would like to introduce you all to my Non PBG Ash J Bass.

All stock parts except for 3 x 250k Bourns audio taper pots, Sprague 0.047 Orange Drop Capacitor, Switchcraft output socket. Finished in a blend of 4 parts ColorTone Cherry Red to 1 part Blackstone Uluru Red Fountain Pen Ink, stained twice, then finished off with 20 odd coats of Tru Oil on the body and around 12 or so coats on the neck.
Front full length.jpgFront vertical.jpgBack.jpgFront horizontal.jpgheadstock.jpg
http://www.buildyourownguitar.com.au...ead.php?t=4813
 
Here's my version of a 3 string. It has a Tassie oak neck with Jarrah pieces, Western red cedar pieced soundboard and sides. A bit of ply for the back and wired with a piezo under the bridge. All the timber was recycled out of the garage. Everything was made from scratch except the tuners and strings. R0010858 (2).JPGR0010861 (2).JPGR0010862 (2).JPGR0010863 (2).JPG
 
Is this open to re-builds also? My Carsen re-build will be unrecognizable once it's finished!
 
Is this open to re-builds also? My Carsen re-build will be unrecognizable once it's finished!

Hi mate, Adam's intro unfortunately mentions Any Guitar or Bass built from scratch or from a kit you purchased from another company is eligible, as long as you built it.
I would still vote for it.
 
That's fair enough. It was worth a try! I reckon I've put more elbow grease into this rebuild than my LP but the rules are still the rules!
 
send a quick email to Adam, he may allow it, otherwise we need a comp for refurbed/restored guitars too since tons of work goes into some of these

just sent him a message myself for clarification...

some awesome work here, well done guys
 
Last edited:
It rules out my refurbed fret less bass too not that it was as high a standard as the J Bass already entered.
 
we shall see... hopefully either a category for major refubs / resto of branded guitars or a separate comp... stay tuned

some awesome CBG style offerings so far, both are amazing, and love the PBass scratchie, very nice work
 
Is this open to re-builds also? My Carsen re-build will be unrecognizable once it's finished!

Hi Zandit,

I’ve added restorations, refurbs and refinished guitars to this GOTY Comp.

Thanks Stan for the input.

I’ve decided not to put a long list of conditions on entry… I think the judges will be able to recognise when someone has replaced a bit of hardware/pickups and when they have completely rebuilt and refinished a guitar or bass. So it will be self-regulating and judged appropriately.

I guess we'll need some sort of prize if we get a few entries.
 
Now we've resolved this, I'll remove these comments discussing the Refurbish idea in a day or two, just to clean up this thread.
 
My First Build, Please Be Gentle

Well, I had hoped this would be a Pitbull Build, but the Tele Deluxe Kit was back ordered when I had the means to purchase it, so I kind of had to order what I could. I ended up getting a kit from a company here, in the US called Seismic Audio. They mainly deal in sound equipment, but they had a few kits as well. They only sold this kit in basswood, which I was worried about, because I wanted to go,with a natural walnut finish, but I worked hard on it, busted my butt, and I think it came out GREAT. My friends have told me that if they hadn't witnessed the stages of the build, they would have thought I was lying about building it. I had some Fender wide range humbuckers lying around, so I added those, upgraded the tuners,and put on some black strap locks. I apologize that the only shot of the back that I have is from when It was hanging outside while the clearcoat was dryingThis is my first, of what I figure will be many builds.
image.jpegimage.jpegimage.jpegimage.jpgimage.jpg
 
An older refurb....again, please be gentle!

Well, as I read through all of the rules for this little competition, I realized I had another eligible entry. This is my 1968 Univox Custom. I've always had a thing for 60's and 70's Japanese Guitars, and I found this treasure on EBay in approximately 2003. I think I paid about 70 bucks for it. It had no-name Zebra humbuckers in it, the original Tremelo Tailpiece was gone, and it had been painted bright yellow with a brush and latex exterior house paint. I was kind of disgusted when I removed the latex paint, and found a beautiful, yet mostly sanded off sunburst finish. However, since that finish was cooked, I went to a local auto paint supplier and had them mix me up a nice pearl white. I rewired the guts, and stuck in a couple of pickups out of a late nineties Epiphone Les Paul, and a Grestch tailpiece I had lying around. I also replaced the 3 way blade switch (like what you would find in a telecaster) with a 3 way toggle out of the same Les Paul that the pickups had come out of. The univox head badge was long gone when I got the guitar, and I'm always keeping my eyes open for a replacement. I think the guitar came out really well, but the back is dented as if it had been in a hailstorm! I was in my early twenties when I took on this project, and using wood filler or body filler to smooth the back never even crossed my mind. Hindsight is always 20/20 as they say. I included a photo of what the guitar would have looked like new. Being an older refurb,math at I don't have a case for, it has taken on a few dings over the years when moving, etc.
image.jpegimage.jpegimage.jpegimage.jpegimage.jpegimage.jpeg
 
2 nice entries Crash!


Thank you very much, Stan. The Tele plays amazingly, and not to brag, or sound pompous...I think my finish looks better than anything I've seen from fender in a while. I'm very very pleased with how it came out.
The Univox on the other hand...doesn't play great...isn't the best finish...isn't the best sounding guitar...but it holds a special place in my heart because my dad, who passed away 6 years ago guided me through mixing and thinning the paint and using the spray gun. He painted cars in his spare time...something he picked up later in life, just because he enjoyed doing it...and that Univox is a project we kind of did together, where he thought me to use a pro spray gun, etc. it'll hang on my wall next to his old Silvertone acoustic as long as I can help it!
 
Back
Top