BYO Guitar Semi-Hollow: The Impatience Build

I’ve been waiting almost 5 weeks for my first PB guitar and the anticipation is killing me :). Nobody has any idea when it will actually ship but I really want to mess around on an electric, so I just ordered this from the US.

They’re calling it ‘paint grade’ because of a knot in the back. I’d love to avoid painting or doing a burst so I’m trying to think of other creative ways to hide the knot: maybe some fake grain or something? Anyone have ideas/suggestions?

It’s a solid mahogany body, flame veneer over ‘solid’ maple top, 24 fret and 25.5” scale length. I’m assuming it will get all new electronics, wiring, hardware, etc.

24F047A3-6DC5-4052-BF59-EB83C7F5835F.jpeg607C2369-9214-433E-AF1D-D039E6CB312E.jpegC2BF634B-2023-407C-AB90-E1F8FC6DF42F.jpeg
 
Yeah I was happy when I saw the pic, I was expecting worse for ‘paint grade.’ I figure it’s just an opportunity to learn - maybe I can use tinted grain filler or something to help hide it. No big deal at all if I can’t, but if I can, it seems like a good skill to have for future projects.

20 years ago I was a finish carpenter and became a bit of a perfectionist when it comes to wood.
 
Last edited:
I am interested to see how you manage it. My kit is basswood with a most uninteresting grain, so I went solid paint thinking it would be easier. I am unsure if it is, but it has it's own challenges.
 
Depends what finish you are thinking about but if you are going to stain I honestly wouldn't even bother trying to hide that knot because it's very small and it's on the back anyway.
 
Depends what finish you are thinking about but if you are going to stain I honestly wouldn't even bother trying to hide that knot because it's very small and it's on the back anyway.

+1

ignore this bit, I just needed more characters
 
USPS is showing “Delivered” to an address in the state the guitar was shipped from. Hopefully it’s just a label mistake but it’s starting to seem like the universe really doesn’t want me to have an electric guitar (my PB guitar is now delayed 5-7 weeks.)
 
I agree +2. Nothing wrong with the knot, it is part of the timber grain. I definitely would not solid colour (Whoops- translate that - color) that kit. Love mahogany.
I'd be Tru-Oil only on the the mahogany but I'm a Tru-Oil lover.
I will be interested in your colour selection on the maple. (Then Tru-Oil again. hihi)
 
I like that there's some dark grain around the knot. I think it will be fine, I just don't want the grain around the knot to absorb color/stain and the knot end up glaring. I didn't mean to make that big of a deal about it, but thought if there was a creative way to blend it in more I would try it.

BYO Guitar said all the packages they sent that day are being labeled as 'delivered' so it sounds like a scanning mistake. Hopefully the guitar will be here today or Monday.
 
4CAD3C19-DF5C-4895-B3F7-74C12A82C33B.jpegC6E9E5F6-595E-4410-928F-3FB91383BA54.jpeg

It arrived, and it’s beautiful.

Very hollow - the horns are hollow and it’s light. It should resonate nicely. The neck seems like a perfect fit - a slight tap with the palm seats it and it doesn’t fall out at mild angles. Hardware is as to be expected although it comes pre-wired.

It feels narrow at the nut but matches PRS “Pattern” dimensions (width and depth) so I think it should be OK.

I’m very happy with this.
 
Last edited:
I have basically the same guitar from Pit Bull. Adam had some examples in but they didn't have any bridge holes drilled and the pre-wired harness was for a set-up like yours, but the control holes were drilled for master volume + tone and two small toggle switches. People were returning them so I got offered one very cheaply. There were also issues around the neck pocket on mine with big gaps between the ply top and the main body (shades of cheap 70s Japanese copies). A not-great engineered wood fretboard. Drilling the post holes on a curved surface always put me off (no large pillar drill to hand) and the last straw was when I found that the neck was too twisted to use.

I may try taking the top off, putting a flat top on it and turn it into an acousticsonic Strat-style guitar, using a Tele neck I have spare. (I hope to round the horns off if there's enough wood to do so).
 
837C621C-791B-43A7-AA21-A0DB0A870D60.jpegEB1AE975-DE0F-4D29-BF29-AC94DA11827E.jpeg6623B3FF-B7AB-44C4-A14A-77E9D5EC9B56.jpegB9F0331E-6BF2-4099-907F-384BA7A5D8B3.jpeg

This one is as close to perfect as anyone could expect from a DIY guitar factory. The scale length is also spot on. There are a few blemished around the binding that need to be touched up. That’s really the only thing I can find ‘wrong’ with it. I’m amazed at how little there really is to do, especially if one were to use the stock wiring.

It’s very comfortable on the knee / in playing position. I really like it a lot.
 
Last edited:
Haha :). I think its more likely a different factory trying to learn a ‘new’ or borrowed design. I actually had this kit in my wish list for several years - BYO’s been doing it quite awhile now.

The inspiration for the guitar came from the band Phish who I used to be really in to. And really his guitar came from a Fender Starcaster inspiration. The maple guitar was back in the mid 1990s and still is my favorite for tone (his later guitars are/were Koa) but the natural maple looks unfinished to me. So I still can’t decide what to do for a color.
A966E4C5-BD08-4CA3-A673-641904BF1D71.jpeg
 
I actually have a set of plans for a Starcaster. It's on my future build list.

Sent from my SM-G960F using Tapatalk
 
83EF20BE-50BF-4D59-9842-132B23907BB0.jpegI think I’m leaning towards a natural finish with this one. To me that usually seems ‘unfinished’ but the natural maple guitar this was modeled after was such a big part of my life that it feels wrong to do anything else to it.

I’m not sure what the finish will be - maybe true oil, maybe nitro. I’d like to find something that somehow enhances or adds depth to the grain. The back and neck will get some kind of brown stain - maybe a walnut color. Something like the pic below. Also I’m not sure how I feel about the ‘end grain’ after looking at the above pics- looking at the body in playing position is like looking down at a tree stump with the rings. Maybe I’ll grain fill before staining - any thoughts or ideas? Here’s another pic of what I’m talking about:

28782CAF-46FC-40AD-943F-2B496B1C4D94.jpeg
 
Last edited:
That could work well.

Easiest to mask the binding when staining. You'll only have to mask the sides, which is nice and easy and all straight edges compared to masking binding on the top, which is all curves.
 
That knot is in the back anyway so I wouldn't even pay attention to it because the most beautiful part here is the guitar. I can tell how excited you are to receive it because you reminded me of myself when I got my first guitar. I read reviews for a very long time, and one day I found an article on https://www.happynewguitarday.com about the best electric guitars. It was very informative and so I decided to buy the ESP LTD EC-256FM Electric Guitar. I was mesmerized when I received it. I still have it, even though I already upgraded to The Gibson Les Paul Studio guitar.
 
Last edited:
Back
Top