Build #2 Non PitBull Rebuild - Vintage Brand Strat Copy

Rossc0

Active member
So not sure if this is actually number 2 or number 3. Original Number 2 is on order, but this fell into my hands on Tuesday.

Vintage.jpg

From what i can gather they were pretty decent guitars, and the wilkinson picks get a pretty decent wrap for what they are.

Plans are failry straight forward at the moment. The example I have is pretty scratched up, so its a fresh coat of paint, possibly new electronics and probably tunners. The trem is broken so that needs to go as well.

Right now its going to be cream, but who knows that may change.
 
where did you score the vintage strat Rossco ? So you have to strip the paint and re-finish ? great project !
 
Was a score from the Daughters boyfriend. That, a little peavey rage 158 amp and a waawaa peddle. He's heading to the UK to take up a paramedic job. Think he's trying to placate me, with dragging my daughter half way round the world and all.
 
Another one? One of my mates has just completed his first year in a similar role with London Ambulance. Seems to be an awful lot of Aussie Ambos in the UK!
 
Yes, think most of his graduating class are heading in that direction. Think NSW only picked up 2 out of a class of 30 odd.
 
Those Vintage V6 Strats are still being made, and they certainly are decent guitars for the money. However the more basic ones do normally have cheaper ceramic pickups, rather than the Alnico ones Wilkinson sell for after-market fitting. Trev Wilkinson said to a friend of mine at a guitar show that the electrics were the worst bit of the Vintage guitars, as they couldn't afford to use imported pots and switches and the local Chinese made stuff wasn't very good. So an upgrade to the pots, switches and pickups is recommended.

Another friend has one of the two prototype John Frusciante Strat models that Vintage made but never brought into production (it was turning out to be too expensive to build at the price-point they wanted), which he bought from the Vintage stand at a guitar show. That is a stunning sounding guitar.
 
Well that's it broken down, bit faster than putting one together. Now to the sanding,, joy.

When you're doing a respray, do you need to take it all the way back to wood?

strat1.jpg
 
If spraying a solid colour probably not unless you are concerned that refinishing product is not compatible with what is already on there. You never know, there could either be a pleasant or very unpleasant surprise if you fully strip it back. Fred's plywood Strat that he refinished is a stunner.
 
Cheer Waz, next question. Replacement bridge. String spacing on this is 54mil which translates to 2-1/8 inch. The two in the shop here are 2-1/16 and 2-7/32. Either of them good enough, close enough, is it a huge deal?
 
I'd be tempted to go with a Wilkinson replacement bridge as they aren't expensive and you get a steel trem block included (you could easily pay as much for a steel block as you do for a whole Wilkinson bridge). With the original bridge being Wilkinson as well, you should be able to get an exact match.

If you don't get the same bridge spacing, then the strings on the neck won't run parallel to the neck edges, but will either get nearer or further away from the edges as you get towards the bridge. So it's always best to get as close a match as possible. Also, look on the bridge manufacturer's web sites for dimensions as they might also have them in mm as well as imperial - some mm figures don't translate into imperial very well and most Asian-built guitars were constructed in mm.

However, Strats do tend to come in just two sizes of string spacing, with US builds using the wider spacing and most others using the narrower one.
 
Well that was hard work, but she's finally naked. Nothing to horrible.

Now the prep really begins I suppose.

stfront.jpg
stback.jpg

Plan at the moment is cream / Vintage white, Red tortoise shell pickguard and trem cover. Fender Parchment knobs and pickup covers, new Wilkinson Bridge and a set of Tonerider vintage PUPs
 
Just trying to figure what timber that is? From the colour and lack of any defined grain that would suggest Basswood?
 
Current ones are now American alder, though depending on the age it may be 'eastern poplar'. But I don't think they've used Basswood for the Vintage bodies.
 
Don't think its basswood, No fibres and its been grain filled. Not that I'd really know, haven't seen basswood or played with that I'm aware of.
 
Back
Top