August Guitar of the Month Competition (for Guitars and Basses finished in July 2016)

adam

Well-known member
August 2016 GOTM

Enter your finished guitar or bass here to be judged for Pit Bull Guitars August 2016 Guitar of the Month.

Please remember:

For Guitars or Basses finished in (or before) July 2016

One guitar/bass per member per month
It must be a Pit Bull Guitars kit (mods and upgrades acceptable)
Guitar or Bass must be finished and playable


We need at least 4 photos:
· full guitar shot from the front;
· close up of the body finish;
· shot of the back of the guitar; and
· close up of the headstock (please, no brand name logos)


Please post your photos in this thread. If you are having issues posting photos on the forum, please email them to adamboyle (at) pitbullguitars (dot) com

Please note: This competition is open to amateur guitar builders only. If you are making and selling guitars for profit, you are ineligible.

Competition for August closes 31 July 2016
 
Ok, lets get this month rolling. Its all about the bass no treble.

JBA-4, de-fretted with CA glue fretboard finish. Neck finish Dingotone clear, body FW Jarrah & wipe on satin poly. Frosted pickguard, Tonerider Jazz Bass pups, Bourne mini pots, cloth wiring, Switchcraft jack plug, orange drop cap, Fender strap knobs, Goto bridge, upgraded screws all-round, bleached bone nut, Ernie Ball cobalt flatwounds. I was going to recess the bridge but a small neck shim has done the job nicely.

Fullfront Light.JPG

Front_Angle.JPG

Back.JPG

Headstock Light.JPG
 
Last edited:
its a stunner Ponch, you set the bar nice and high for this month. Makes me want to build a fretless ash jazzy now !

You must be a fretless convert now ?
 
Howdy, here's my entry for July 2016, I made my "Frippin'rocker" based on the RC-1M kit.

I made the pickguard and trussrod cover from acrylic sheet with a glitter foil on the pickguard and adhesive letters from Michael's craft stores on the trussrod cover. Then I coated the trussrod cover in resin to protect the lettering. The name is a tip of the hat to Robert Fripp and the BachenRicker guitar company, who are both yuge in my book. I know Mr Fripp plays Les Pauls, but I just like the way the name worked out.

The pickups are NY-IIIs from GuitarFetish.Com which had to be cut and filed to fit the humbucker cavities. I wanted it to look and sound like a Ricky and these were close. They sound pretty good.

The stain is espresso color. The mahogany back took it much better than the basswood front, which I fought with to get smooth. The peghead and neck were also very easy to work with the stain. I used Danish oil and left it matt for a satin finish.

Big thanks to Adam for making this nice kit available and to the other builders here for posting inspiration and tips, especially the other RC-1 builders!

Oh yeah. It also has the mini-Grover upgrade and copper foil in the cavity, both from PitBull. It stays tuned really well. I may add a twang bar eventually.

It was great fun to build and plays great! Very happy customer, it grows on me every time I pick it up.
 

Attachments

  • 616201620643.jpg
    616201620643.jpg
    215.4 KB · Views: 312
  • 616201620719.jpg
    616201620719.jpg
    454.4 KB · Views: 313
  • 616201620752.jpg
    616201620752.jpg
    333.6 KB · Views: 343
  • 616201620839.jpg
    616201620839.jpg
    349.4 KB · Views: 302
Last edited:
Hi everyone,
Time for another entry, here is my "Battle Axe". It is a custom 24fret EX-1 with sharktooth inlay and floating trem. I finished it in kind of a hammered/textured paint job with some norse symbols (body- Odin triskelion and truss rod cover- troll cross) and runes (translates to "Iron Vengeance". I also chucked an Entwistle X3 in for the bridge pickup and fit a trem toolkit to the back of the headstock. It was shipped with the wrong colour neck nut and I am waiting on the correct one but other than that it's all good to go. Anyway here's the pic's.
DxvkPqk.jpgczdOCOF.jpg
Eh3zL7L.jpgID9YeKH.jpg
1wsQwZf.jpg

Alright, cheers for reading.

Mulldoe
 
Last edited:
That finish is extremely hard wearing, I've done all the desk tops in my office with it. Never thought of doing a guitar with it, but it looks great!
 
Hi everyone,
Time for another entry, here is my "Battle Axe". It is a custom 24fret EX-1 with sharktooth inlay and floating trem. I finished it in kind of a hammered/textured paint job with some norse symbols (body- Odin triskelion and truss rod cover- troll cross) and runes. I also chucked an Entwistle X3 in for the bridge pickup and fit a trem toolkit to the back of the headstock. It was shipped with the wrong colour neck nut and I am waiting on the correct one but other than that it's all good to go. Anyway here's the pic's.
View attachment 12838View attachment 12839
View attachment 12840View attachment 12841
View attachment 12842

Alright, cheers for reading.

Mulldoe

That guitar looks wicked, you should record a demo so we can hear what it sounds like.
 
Hi, here is my PBG-1. Not a very original name, but definitely an original guitar.
From the original kit, the edges have been rounded and a very slight belly curve and forearm cut added.
The bone nut I carved from an old dogs bone after reading that DB did this once.
Pickups changed for Entwhistle Dark Star NDs. Volume and tone pots are CTS switches, each splitting a pickup. The knobs are changed for knurled black knobs that are easier to pull on for the switches.
The colour is Dingotone Black Stump burst over ebony Timbermate grain pop, Dingotone natural neck.
The headstock logo is black cut-vinyl under DT on the headstock, and over DT on the body (in case I feel like taking it off some time in the future).
... Everything else is standard :)
image.jpg
image.jpg
image.jpg
 
Back
Top