August 2015 Guitar of the Month

adam

Well-known member
Enter your finished guitar here to be judged for Pit Bull Guitars August 2015 Guitar of the Month.

Please remember:


  • One guitar per member per month
  • It must be a Pit Bull Guitars kit (mods and upgrades acceptable)


We need 4 photos:


  1. full guitar shot from the front;
  2. close up of the body finish;
  3. shot of the back of the guitar; and
  4. close up of the headstock (please, no brand name logos)

Please post your photos in this thread. If you are having issues posting photos on the forum, please email them to adam (at) pitbullguitars (dot) com

Please note: This competition is open to amateur guitar builders only. If you are making and selling guitars for profit, you are ineligible.

Competition for August closes 31 July 2015.

Winner will be judged by the Pit Bull Guitars Judging Panel, including the winner of the July GOTM.
 
My TL-1 Guitar of the month

Here are some pics of my entry.
It's a standard kit with no mods.
Thought it would look good with the Outback Sunset Dingotone with the black against it.
A few wiring issues as i put it together but now all fixed and it plays really well, lightweight and it has a good action.
I really enjoyed putting it together and as it was my first build I took my time and reckon the finish is great.
Now to start on the SG...
Cheers,
Rob...
 

Attachments

  • IMG_0621.jpeg
    IMG_0621.jpeg
    272.9 KB · Views: 315
  • IMG_0622.jpeg
    IMG_0622.jpeg
    277.3 KB · Views: 312
  • IMG_0623.jpeg
    IMG_0623.jpeg
    247.6 KB · Views: 318
  • IMG_0624.jpeg
    IMG_0624.jpeg
    150.8 KB · Views: 292
  • IMG_0620.jpeg
    IMG_0620.jpeg
    206.1 KB · Views: 311
That is hot. The black hardware works incredibly well with the colour you have chosen. Is the neck pickup black as well?
 
sweet looking Tele Rob, well done on the colour choice and the black hardware works really well. You need to enter it in the August Guitar of the month thread.
Were the pics taken from inside a caravan ?
SG for your next build a great choice
 
The AlohaMatic
Here is my build of a Gr-1sf in flat black with satin finish. Stock parts except one balance pot and shielded wire, with WierdBits custom wiring schematic: pickup selector, master tone, pickup balance pot, and master volume. It plays great and is almost as loud as a regular acoustic guitar. Thankfully the wiring is perfectly quiet with no hum. My one finish complaint was not having the exact shade of off white to match the binding (mine is slightly more white as seen on the truss rod cover) but overall it was the guitar I set out to make. Thanks to the forum for advice and encouragement!
Aloha, Jeff
 

Attachments

  • image.jpg
    image.jpg
    52.9 KB · Views: 271
  • image.jpg
    image.jpg
    42.1 KB · Views: 244
  • image.jpg
    image.jpg
    68.7 KB · Views: 256
  • image.jpg
    image.jpg
    51.9 KB · Views: 247
nice one Jeff you really finished this build nicely. Well done with the setup and wiring as well ! Very strong contender for sure
 
Relic Strat

Hello, this is my first post and entry into the GOTM. I have been building this strat in between beers on Friday nights with the boys at 4D Guitars ! Thanks Wokkaboy and Wayne. Its a standard kit with Tarkine Green stain. Ive gone for a relic worn look inspired by Francis Rossi from Status Quo who has a 50's telecaster with a strat pick up configuration. It also features Francis Rossi's trademark hole drilled straight thru the body ( which he apparently did back in the day to help prevent his guitar lead from pulling out of the jack) The boys at 4D have got me hooked into this guitar building thing and im on my second build but have lost track of the beers !
IMG_0938.JPGIMG_0940.JPGIMG_0947.JPGIMG_0939.JPGIMG_0942.JPG
 
well done Rozza for a first build you really excelled and learnt so much. Was good fun guiding you through the build. You got the most out of the kit. Many more great builds to come from you no doubt
 
Looks great Rozza! That tarkine green looks awesome with the black in the grain. Love the headstock shape too. Well done!

cheers,
Gav.
 
Wokka's STA-1M tobacco burst entry

This is my entry STA-1M tobacco burst. Finished this build March 2014 but haven't had a chance to enter it. It looks a bit similar to GOTM July 2014 but this one has a maple neck.
Gold hardware upgrade and the standard camphor veneer on the headstock. Stained in FW jarrah and Dingotone Outback Sunset.
Was going to enter the Tarkine green STA-1 but didn't want two green strats entered !
 

Attachments

  • front.jpg
    front.jpg
    496 KB · Views: 220
  • front close.jpg
    front close.jpg
    555.5 KB · Views: 214
  • front close2.jpg
    front close2.jpg
    673 KB · Views: 170
Last edited:
Back
Top