Here are my acoustics in order of acquisition, earliest on the left.




So we have:
1) 1999 Takamine Santa Fe DSF-48C. Bought new. The original digital DSF pre-amp was a battery eater and I replaced it with the Cool Tube model. It now sounds a lot better when plugged in and new batteries won't be needed mid-gig. Nice but not outstanding when played acoustically due to its fairly solid feedback reducing construction, but it shines when amplified. Solid spruce top, laminated rosewood back and sides. Mahogany neck, ebony fretboard.
2) Martin DR Acoustic. A well used guitar before I obtained it, this has a great action and the Fishman soundhole pickup was a bonus for the price. Solid spruce top, laminated mahogany back and sides, rosewood fingerboard, mahogany neck.
3) Nylon strings means this must be my Yamaha CG-171SF (love the snappy name) flamenco style guitar. Solid spruce top with cypress wood back/sides and an ebony fretboard gives it a brighter tone than standard classical guitar. It has a nice sound to it and was obtained via eBay from nearly new at a quarter of the cost of the new price.
I've replaced the original plain and slightly creaky machine heads with a better and fancier looking set.
4) Tanglewood TW145-12 SC twelve-string guitar. This was an utter new bargain and the B-Band pickup system sounds fantastic. Solid cedar top, laminated mahogany back and sides. The body is quite small but quite deep (Tanglewood's 'folk' size). It's so clear and jangly and I love this guitar. I should really play it more!
5) 1965 Gibson Country Western. It's been a working guitar and as a result has a few knocks and scrapes in the finish, but is structurally sound. The clear lacquer has darkened considerably over time, and it's obvious where the lacquer has worn away over the binding as the binding shows through as almost white. The neck is thin, so it's easy to play.and the action is good. It's a very light guitar, almost nothing to it, and has a corresponding light tone to it, not like a typical dreadnought at all.
Solid cedar top, solid mahogany back, sides and neck, Brazilian rosewood fretboard.
I've replaced the tuners with identical new types, as one was very bent and one was rather stiff - obviously keeping the originals safely stored away. I initially replaced the original ceramic bridge with a Tusq one (which supposedly improves the sound but I didn't notice any difference). Since I took this photo I've replaced the whole adjustable bridge with a solid bone one and replaced the cheap plastic bridge pins with some bone ones. Obviously the new bridge looks a bit chunky but it has cured the slight rattle on the top G and E strings.
I generally use 0.012"s or 0.013"s on the Takamine and Martin, the lightest set of strings that I can find for the 12 string (normally 0.010"s), high tension strings (currently Aquila) for the Yamaha and 0.013"s for the Gibson. The Gibson needs heavier strings to help bring out the low end and could really do with even heavier strings on the bottom three strings.