Results 1 to 9 of 9

Thread: Build One: ES-1GT

  1. #1

    Cool First build: ES-1GT old-timey look with patina copper accents

    Hey everyone,

    Thanks for taking the time to check out the build.
    Cannot wait for whatever journey the next few weeks have in store for me.

    I guess I'll start with the unboxing.
    So the kit had just arrived and in my excitement, as i was taking it out the box, i dropped it...
    Just kidding! The only thing that dropped was my jaw.
    There is just something about these es1s that I absolutely love.

    I have just finished trying a little test fit, I'm currently at work so I cannot do anything too time consuming but it seems all the parts are here and accounted for. I have only one issue that has come out of the woodwork. Yes, pun intended.

    The neck pickup does not fit into its new home. Bridge pickup fitment is spot on, really nice but it seems to me like the routing jig has slipped on the neck end. Now it doesn't seem to be a massive problem as I am planning to either sand it down a fraction or grab the router and give myself the extra bit needed to fit the pickup. That should solve the issue and anything i do will be hidden under the pickup itself. I will supply photos of both the kit and the issue I'm having.

    Anyway, like I said before I am really looking forward to this.
    I will post again with the plans for the guitar and how I think I'll go about it.
    Last edited by rhysneilblack; 17-04-2019 at 03:38 PM.

  2. #2
    Overlord of Music Sonic Mountain's Avatar
    Join Date
    Jul 2017
    Location
    Toowoomba, Qld.
    Posts
    2,309
    Welcome aboard.
    Build 1 - Shoegazer MK1 JMA-1
    Build 2 - The Relliecaster TL-1
    Build 3 - The Black Cherry SG AG-1
    Build 4 - The Sonicaster TL-1ish
    Build 5 - The Steampunker Bass YB-4
    Build 6 - The Howling Gowing ST-1

    "What I lack in talent I make up for with enthusiasm"

  3. #3
    Member emuflats's Avatar
    Join Date
    Feb 2019
    Location
    Adelaide, SA
    Posts
    50
    Welcome & enjoy your journey

  4. #4
    For a bunch of photos of it straight out of the box: http://https://imgur.com/a/zQ0f0nD

    Will be doing a full test fit soon.
    Otherwise here is the full kit laid out with all the hardware bagged up.

    Click image for larger version. 

Name:	Full Kit.jpg 
Views:	42 
Size:	50.3 KB 
ID:	30461
    Last edited by rhysneilblack; 10-04-2019 at 04:20 PM.

  5. #5
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,277
    Welcome to the forum.
    On my ES1 it needed a small amount of sanding out in the corners so that pickups would fit properly.
    Timber is way too soft to attack with a router without doing some damage and sanding doesn't take much effort or time.
    Cheers, Waz

    Sent from my SM-A520F using Tapatalk
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

  6. #6
    Overlord of Music Fretworn's Avatar
    Join Date
    May 2013
    Location
    Hornsby Area, Sydney, NSW
    Posts
    3,640
    Welcome Rhys
    Current:
    AST-1FB

    Completed:
    First Act ME276 (resurrected curb-side find)
    ES-5V
    Scratchie lapsteel
    Custom ST-1 12 String (to be converted to 6 string)
    JBA-4
    TL-1TB
    Scratch Lapsteel
    Meinl DIY Cajon
    Cigar Box lap steel

    Wishing:
    Baritone
    Scratchie 12 string
    Open D/Standard Double 6 twin neck

  7. #7
    So after my fair share of sanding, I have decided I want to go for an "old timely" look.
    I have found a couple of glue spots and a scratch on the flame maple cap but rather than do away with them, I'm going to embrace them.
    Any imperfections in the maple cap will only add to how perfect this ends up being, or at least i hope so...

    It's all part of experimenting and chasing what image I have in my mind for the guitar. If i wanted a perfect finish I would certainly take my time but I feel that going with the 'mistakes' and making them work for me seems like such a great sentiment for not only this but for life in general. I bet you didn't think this would wind up as philosophical as this did you? haha

    I have stained the guitar this morning with black colourtone stain, did a single coat of this to bring out the grain and get a bit of variation in the following coats which I have since done. 3 coats of tobacco brown colourtone stain and here we are. This is currently where the kit is at. (See attached photos)

    I will have 2 posts that follow this, 1 on my plans for accents, custom hardware and bits. The other for regarding how to finish the guitar itself. Would really love some educated input.

    Thanks for following along, its been awesome so far! LOVE IT!

    Click image for larger version. 

Name:	57289470_328511494477141_450104992003522560_n.jpg 
Views:	34 
Size:	63.4 KB 
ID:	30549
    Click image for larger version. 

Name:	57154426_599458057189794_5266106371387949056_n.jpg 
Views:	34 
Size:	86.1 KB 
ID:	30550

  8. #8
    So regarding custom bits and pieces for the build, Im am looking at doing a bunch of copper patina parts for it.
    I like the idea of this old timely colour (seen in above photos) and the patina copper look mixed in with some chrome parts.

    Im going to do a mustard (red patina) & table salt (blue patina) mix on some copper plate and copper rod, then submerge in ammonia. This will quickly colour the copper giving me a really amazing look. (See photos attached)

    I will do copper rod and cut to size and make some knobs.
    Copper plate for a pick guard, truss rod cover and logo/symbol.

    Cannot wait to see what it will look like!!!

    Click image for larger version. 

Name:	6151960bcaf96670acffd75fcd72f760.jpg 
Views:	35 
Size:	34.0 KB 
ID:	30551

  9. Liked by: Tadhg

  10. #9
    Now on to how to seal/finish the stained guitar body and neck.

    Would would be a good option? Tung oil or linseed oil? Maybe a wax?
    I honestly have no idea when it comes to this so any ideas or suggestions would be appreciated!

    Don't mind if it ends up glossy, matte or somewhere inbetween. I just want the flame maple and colour to really pop.
    I am thinking an oil will help achieve this. As the stain dries it becomes dull and very matte, while the stain is wet it really pops with heaps of depth in the timber grain and flame maple itself. SOS!!!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •