Hey all,
I got the IB-5 kit a year ago, and didnt manage to do anything with it till now.
I've checked out all the parts (going all stock kit parts, at least at this stage), and have the following thoughts for the build:

- The ash body has a really nice grain, so I want to do a stain to keep it visible. Thinking of trans black. Will likely keep the neck natural with a clear finish

Reading over some other IB-5 build diaries, I have a few similar issues:
- The hole for the jack is too narrow so the jack only goes in about a quarter length before getting stuck. Will have to enlarge it
- Due to the contours on the body, the jack wont be flush against the body. So will consider creating an inset for it
- The cover for the control panel sits on top of the body, and would look better with an inset and flush finish to the body
- the pot knobs sit a little high over the body. Saw someone use a plastic washer to bring the knobs back to the body.

Looking forward to seeing it come together.