Page 5 of 5 FirstFirst ... 3 4 5
Results 41 to 42 of 42

Thread: TL-1tb “Baritone” - 1st ever build

  1. #41
    Quote Originally Posted by christodav View Post
    If you are not pleased with the colour, you can always sand it back a tad and then on your next coat, cut back the yellow to 30/70 or 40/60. The fretboard is trickier, but if you lightly sand it back you might be ok as it is. Just lightly.
    awesome thanks mate, might have to give that a try next time!

  2. #42
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,268
    Don't think you need to worry about the neck as the colour on it looks good. Body is a fraction more yellow but swapping ratios should help. If you have some scrap pine it could be a good idea to do a few test samples to work out the mix you are happy with.
    For binding that can be scraped off later. Alternatively applying a really good painter's masking tape helps to make binding scrape a whole lot easier once all layers of finish have been applied. Fiddly job no matter which way you go.

    Sent from my SM-A520F using Tapatalk
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

Page 5 of 5 FirstFirst ... 3 4 5

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •