The roller coaster continues.
After deciding to have another go at the finish (saying to myself 4th times the charm), I had to go buy more paint and I thought hmmm I like the red but there is another colour that I really like and I wonder what it'll look like on a guitar.
So after a trip to SCA with the paint code I had one of these cans in my possession. As a side note, they spray quite well and the nozzle can be adjusted to give you vertical or horizontal spray pattern.
So I sanded back the red, sprayed some more primer, bit more sanding to get it flat and then after checking it looked good I sprayed the colour.
And here is the colour sprayed on the guitar.
Then the swear word. The paint has started sinking in a couple spots back into the grain of the wood. I'm confused as to why it happened now because I never had that issue when I finished it in the blue and the red.
Anyway, here is a photo in the sunlight. It's most obvious near the pickup cavities and neck pocket but there are a couple spots where it won't be covered by the pickguard that has the paint sinking into the grain.
Seems I truly am cursed with this guitar building thing. Anyway, now I need to decide whether to leave it, scrape the bindings and clear coat it or try to sand this flat and get another tin of paint and spray another couple coats of colour.