I figured go big or go home, so, I decided on this one, and got them to do it left handed for me. I did a mock build and I'm not sure where to mount the bass bridge. There is a hole for the bridge ground.
I figured go big or go home, so, I decided on this one, and got them to do it left handed for me. I did a mock build and I'm not sure where to mount the bass bridge. There is a hole for the bridge ground.
Hi Sammy, this should help
http://www.buildyourownguitar.com.au...ead.php?t=3048
Enjoy your build
Grant
Thank you very much Grant!
Ohh good on your Sammy. keep us posted
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
I Salute you brave sir!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Hi Sammy, welcome to the forum and good luck building this beast !
@ Franky where have you been hiding mate ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote