Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12

Thread: LP-1S nearly complete, set up ?

  1. #11
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    love your angle finding device Adam, I presume you have to get the guitar body level first ?
    Maybe the neck still needs to be played in a bit more and I suspect a tweak of the truss rod should lessen the string buzzing.
    Also changing gauge strings can change the bow of the neck with heavier strings putting more tension on the neck. see how you go with the heavier gauge strings. I also suspect your nut may still be a little too high. You may need to widen the nut slots a bit for heavier gauge strings or they may sit too high
    Last edited by wokkaboy; 06-02-2017 at 02:37 PM.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  2. #12
    HAHA yes double checked the table with a spirit level and this angle tool adjusted a few areas to make it spot on then checked the neck angle will keep you posted cheers

Page 2 of 2 FirstFirst 1 2

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •