I've been meaning to post these since starting this build back in the start of June. Finally got around to it. The plan is to build a deep red marble effect ST with a blinged up pick guard.
All going to plan but the painting is taking for ever!
Here goes
Sanding completed and sealer applied.....but wrong type. Had to sand off again and apply another compatible with the acrylic paint I wanted to use
Primer coats done and sanded
Black base coat on. Looking a bit rough, but first outing for my new compresser and spray gun set up. All good after sanding back to remove the orange peel.
Marbling next...