A set of Village 52 Blackguard Tele pickups and a Village P90 ( A3 ) for a lap steel
( edited because I can't read labels)
A set of Village 52 Blackguard Tele pickups and a Village P90 ( A3 ) for a lap steel
( edited because I can't read labels
Last edited by dave.king1; 31-05-2016 at 05:06 PM.
nice one DK, I got a set of 52 spec tele pups for my baritone tele, can't wait to hear how they sound.
which tele are the blackguard pups going in and is the lap steel existing or a new build ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
G'day Wok,Originally Posted by wokkaboy
The Tele pups are going in my Squier CVC Thinline and the P90 is for my mates lappy.
I'm pulling my HH Tele down and sending the pups to Tony to have them rewound as split coils to wire it up a a TELE FMT HH
sounds good DK, I remember your mate didn't know what pup to put in his lap steel.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
He was going to sell it and buy a Fender and I told him it's only a bit of 4x2 hardwood regardless of who makes it so let's change the pup first before you waste your pension on something that may not be better
good advice Dave, I reckon the P90 will give the lap steel some life and your mate will be happy with it.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
The current P90 has a really flabby bottom end and no real clarity across the strings, Tony's original suggestion was a split coil bucker but I don't want to have to mod the lappy unless absolutely necessary.
The wind of new P90 should open the articulation up and tighten the bottom end which is all he wants
The 52 Tele pups are now in place and are brilliant, very articulate and much more responsive.
That was with the old strings, will be fitting a new set of 10s before rehearsals tonight.
If the P90 is half as good in my mates lap steel he is going to be very happy
awesome news DK, I thought the tele pups would sound brilliant
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
New strings are on and the whole sonic shooting match just went up another notch
Posting Permissions
Reply With Quote