Results 1 to 4 of 4

Thread: Es2v help needed

  1. #1

    Es2v help needed

    Hi All

    Building a ES2V electric and was saved by the plastic tubing but have two questions. How do I earth to bridge? I have put both posts in and did note note a hole for wire access, is there one and if not how do I earth it. Second question is the timber saddle glued in place or just held by string pressure. Thanks for any advice Cheers Stu

  2. #2
    Moderator Brendan's Avatar
    Join Date
    Apr 2013
    Location
    Perth, WA
    Posts
    3,444
    Timber saddle should just need string pressure to hold it in. As for earthing the bridge - I believe it is via the hole, but having not done an ES (yet), I'll defer to Wokka, Dingobass or the Gavmeister on this one.

  3. #3
    Thanks Brendan will pull out a post tonite to see if there is a hole for the wire, any more feedback on mounting the timber saddle appreciated at it appears a lot higher than the bridge and may move without glue. Thanks

  4. #4
    Overlord of Music gavinturner's Avatar
    Join Date
    May 2013
    Location
    HOLGATE NSW
    Posts
    3,057
    I replied in your build thread.

    cheers,
    Gav.
    --
    Build #01: BC-1
    Build #02: ST-1
    Build #03: JR-1DC
    Build #04: ES-2V
    Build #05: ESB-4 (GOTM July 2014)
    Build #06: RC-1
    Build #07: MK-2
    Build #08: TLA-1
    Build #09: JR-1DC
    Build #0A: LPA-1
    Build #0B: STA-1 (GOTM April 2015)
    Build #0C: MKA-2
    Build #0D: LP-1M
    Build #0E: JB-1
    Build #0F: FS-1

    Find me:
    https://www.facebook.com/firescreek.guitars/
    http://www.guitarkitbuilder.blogspot.com.au/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •