Time to start on a new project. An original shape this time.
Simple pine blank. 45mm thick.
Leveled and thicknessed down to 42mm.
Then rough cut on the bandsaw.
Time to start on a new project. An original shape this time.
Simple pine blank. 45mm thick.
Leveled and thicknessed down to 42mm.
Then rough cut on the bandsaw.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Good to see Pabs, I like that shape....looks Australia inspired!
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Routed to final shape.
I've got a donor neck for this one, so next step is to make up a template and rout the neck pocket. Also, I wanted to give binding a go, so instead of paying a ludicrous amount of money to stewmac for a dedicated bit, I dug around in the pile of router bits I already have and cobbled together this little baby.
10mm wide bearing on a 13mm wide bit.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
I like the shape Pabs, i am not usually a fan of out there designs but i do like that.
Thanks Andy. And thanks Tony, I am not usually a fan of odd shapes either, this one has been banging around getting small tweaks for almost 2 years now. I'm finally (mostly) happy with it.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
nice one Pabs, this should be a cool looking axe
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Looks good Pabs. Nice bit of grain in that pine too.
Reminds me of the Kiesel Vader guitars... Double locking trem?![]()
Looking good Pabs
Sent from my SM-T700 using Tapatalk
Current Projects
#Planning 5 String Bass
Cheers lads. Nicko, hardtail mate. I want it as simple as possible, one pickup, one volume, done.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'