I think I may has stuffed up when bottling the FINAL coats.... D'OH!
It looks like stoopid here bottled the old DT final coats :/
So, to be on the safe side, Can you all please throw away the final coat bottles and I will send out replacements on MONDAY 14.
Sorry for any inconvenience.
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
no drama DB, if you can please bring my final coat Friday. Does that mean the neck final has to be replaced as well ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I've just applied the DT Colourless final Coat to the neck in my kit about half an hour ago, does that apply to me or am I safe continuing to use what I have?
Last edited by DrNomis_44; 13-03-2016 at 01:03 PM.
Hey Doc.
See how the final coat feels after 24 hours, if it is still sticky and looks patchy I would leave it until I get the right final coats out to you.
I have made new batches of both body and neck final coats just to make sure everyone has the correct formula, and yes, I have ditched the old stock so there wont be another face palm moment......
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Woks, yours will be OK as I remember bottling your DT the morning you came over and it was deffo out of the correct tins.
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
ok no worries DB, cheers
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Consider it ditched DB.
Neck kit I got last week...chuck the final coat?
Dedman, you would have recieved the origional flavour so it will be OK.
just give each coat enough time to cure, usually three/ four days with the origional blend before re coating....
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
thanks
Posting Permissions
Reply With Quote