Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Imagine Any Amp at your finger tip's then add another and blend them together

  1. #1
    Overlord of Music kimball492's Avatar
    Join Date
    Feb 2013
    Posts
    2,080

    Imagine Any Amp at your finger tip's then add another and blend them together

    Positive Grids Bias Head Amp Match imagine a kemper amp on steroids
    Comes with Free version of Bias software to clone any amp
    http://youtu.be/JbZZwtmaolo
    Last edited by kimball492; 03-02-2016 at 10:34 AM.

  2. #2
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    good stuff KB was worried about your health hadn't seen a new thread in the last 24 hours

    are you feeling better big fella ?
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  3. #3
    Overlord of Music kimball492's Avatar
    Join Date
    Feb 2013
    Posts
    2,080
    Bit better thanks Wokka, how's the guitars coming along Good Sir

  4. #4
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    good stuff KB
    axes coming along slowly, hard to find energy in the evenings after a full day at work so most of the work is done on weekends
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #5
    Overlord of Music kimball492's Avatar
    Join Date
    Feb 2013
    Posts
    2,080
    That's understandable Woks what's the next project. I still have to finish my daughters Tele must get on with that waiting on headstock decals and sand to 2000 and polish body and tru-oil neck and assemble

  6. #6
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Hey KB, got a few projects on the go, listed in my current projects on my signature. I'm also waiting on some headstock logos from Andyport they should be close.
    Myself and Wayne from 4D are taking 4 beer label axes and a clock to show a guy we know runs a craft beer bar tomorrow night so hoping to sell some or get him to display them for us
    Last edited by wokkaboy; 03-02-2016 at 11:41 AM.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  7. #7
    Overlord of Music kimball492's Avatar
    Join Date
    Feb 2013
    Posts
    2,080
    Hey sounds great Woks good luck with the crafts beer and the guitars. Mind you I think you'll spend more on the beer than you'll make on the guitars lol. Are you a beer maker Woks?.
    Best wishes
    Kimball

  8. #8
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Haha good point KB. I've made a couple of home brews last few months still experimenting and improving. My brew coach is DB is bit of an expert now haha
    Just like building guitars takes practice
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  9. #9
    Overlord of Music kimball492's Avatar
    Join Date
    Feb 2013
    Posts
    2,080
    Yeah I haven't made home brew for years I'm sure the kits and hops and techniques have changed considerably now.

  10. #10
    Overlord of Music keloooe's Avatar
    Join Date
    Jan 2013
    Location
    Melbourne
    Posts
    3,162
    Hmmmmmm I would love a GK1001RB-II preamp going into the power amp of an Ampeg SVT-4 Pro

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •