Sat here rather bored and looked in my desk drawer where i keep "some" of the spare parts for my projects, contents includes; replica Kluson tuners off a Gibson style guitar, spare Zebra pickups, 2 tuno-matic bridges, various strings, saddles off a Fender style bridge, Humbucker pickup for a bass, screws, truss rod covers and of course the tuners and tail for the RC4.
interesting collection of spares Paul. I have my spares laid out over a table so can't really call it a drawer !
Never throw out a part, you will find a use for it one day !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Or at the very least, one day you'll find said part and need to build another kit to put it in.
Paul, it seems your top drawer wants you to build a gibson style kit.
I'm just getting started so I don't have parts enough to necessitate an entire drawer... but I did recently open up a guitar case I had stored and found the original pickups from a Maton MS2000. Guess I have to build something to put them in now...
I have my stuff in a 4L ice cream tub
My bits and pieces are in small cardboard boxes.
Gibson style guitars i already have, Jay Turser Les Paul, Chibson Slash replica.
Nothing will fit in my top drawer, this is about 25% of the parts i have, i am doing a sort of stocktake and getting rid of my excess on ebay soon, literally ran out of room.
I never seem to throw anything out, even when parts are shot, i sometimes salvage something off them.
Posting Permissions
Reply With Quote
![[url=https://www.facebook.com/kellysgutiars]](image.php?s=b84c1a2b459297fd2f609272860e32f9&u=1285&type=sigpic&dateline=1444110346)