So... if you were following my JM1 Mashup thread where I used parts off an ST1-M kit to build a custom jazzmaster you might have been thinking "what about the ST part?"
wonder no more.... here's part II "Fang"
ST body with the JM neck...
I've got some holes to fill and some new ones to make to fit the JM controls on.
I'm using a bunch of left over parts and things ive got laying around, theres no intention to make this one the standard definition of 'pretty'
Oh man I like it allready....but I have been known to do odd things like shoehorning a Gibson P90 into a Squire Stratocaster
ROCK on!
I may not change the World....but I'm gonna leave a SCAR......
looks like another interesting build Mick, I'll be following this one (in black and white) haha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
cut and plug, glue and clamp, drink and wait
finished off a few other projects so Fang is back on the bench... today I adjusted the horns.
nice mods to the horns Mick, are you using a smaller pickguard from gluing blocks in the control cavity ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Nice curvature.
Yeah mate, going to cut a custom one.... thinking pearl at this stageOriginally Posted by wokkaboy
glues dry! time to scribble some lines then hook in with the router!
All trem covers should be recessed!
also... first coat of primer
Posting Permissions
Reply With Quote
